Description
Anyone who has installed a muzzle brake or flash hider knows the frustration of getting it torqued down only to have the ports or prongs land at the wrong clock position. SureFire solved that headache with a simple, smart system. This shim kit gives you 12 stainless steel shims in a range of thicknesses, and each thickness gets its own color. No calipers, no guessing, no stacking crush washers and hoping. Pick your colors, stack as needed, and your device lines up exactly where it should.
Built for SureFire SOCOM 1/2×28 Muzzle Devices
This is the Z-71652 kit, which covers SureFire's 1/2×28 threaded lineup including the SF3P-556, SFA2-556, SFCT-556, SFMB-556, WARCOMP-556, and WARCOMP-556-CTN. It also handles the SF3P-762 in 1/2×28. If you run SOCOM series suppressors, proper muzzle device timing matters even more, since your device doubles as the suppressor mount and consistent shoulder engagement is what keeps everything locked up square and repeatable.
Why the SureFire Shim System Beats Crush Washers
Crush washers deform when you torque them, which means every removal and reinstall is a fresh gamble. Shims give you a solid, repeatable stack that indexes your device the same way every time. That translates to consistent point of impact and a properly seated shoulder for suppressor use. The 300-series stainless construction shrugs off heat and corrosion, so these will outlast the barrel they are mounted on. SureFire even tosses in a small tube of Rocksett to keep things snug. A drop or two is all it takes, so go easy with it.
Keep a SureFire SOCOM Shim Kit in the Parts Bin
Shims are the kind of small part that wanders off the moment you swap a device between rifles. If you are moving a WARCOMP to a new build or just replacing a lost set, this kit gets you back up and running with fresh shims and thread compound in one package. It is a cheap bit of insurance that makes muzzle device installs quick and painless.
Key Specifications
- Manufacturer: SureFire
- Manufacturer Part Number: Z-71652
- UPC: 084871326346
- Model: SOCOM Shim Kit
- Thread Pitch: 1/2×28
- Material: 300-Series Stainless Steel
- Shim Count: 12 shims in varying thicknesses
- Identification: Color-coded by thickness
- Compatibility: SF3P-556, SFA2-556, SFCT-556, SFMB-556, WARCOMP-556, WARCOMP-556-CTN, SF3P-762 (1/2×28)
- Product Type: Muzzle Device Shim Kit
- Shipping Weight: 0.01 lbs
What’s Included
- 12 stainless steel shims in various thicknesses
- Tube of Rocksett thread compound
Frequently Asked Questions
Which muzzle devices does the SureFire SOCOM Shim Kit 1/2×28 fit?
The Z-71652 kit covers SureFire's 1/2×28 threaded SOCOM series devices, including the SF3P-556, SFA2-556, SFCT-556, SFMB-556, WARCOMP-556, and WARCOMP-556-CTN, plus the SF3P-762 in 1/2×28. If your device has 5/8×24 threads, you'll want the Z-71657 kit instead.
How does the color-coded shim system work?
Each shim thickness gets its own color, so you never need calipers to figure out what you're stacking. You test fit your muzzle device, note how far off the timing is, then add or swap shims until the device torques down at the correct index. It makes for a repeatable install that you can duplicate exactly if you ever remove and remount the device.
Are shims better than a crush washer for mounting a muzzle device?
For suppressor hosts especially, yes. Crush washers deform when torqued, so every reinstall behaves differently, while shims create a solid, square shoulder that seats the same way every time. That consistency matters for point of impact and for keeping a suppressor mount locked up properly.
How much of the included Rocksett should I use?
A drop or two on the threads is plenty. Rocksett is a heat-resistant thread compound that holds up under suppressor temperatures, but using too much can make the device a real chore to remove later. If you ever need to break it loose, soaking the muzzle in warm water helps dissolve the bond.




Reviews
There are no reviews yet.