$288.99
39 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Lantac Enhanced Bolt Carrier Group is built specifically for 6mm ARC, featuring a caliber-correct bolt and firing pin sized for the round rather than a repurposed 5.56 part. It's a full-auto style carrier that adds mass where it counts, giving you increased lock time and a more controlled cycling feel. Machined from 8620 steel with a shot-peened bolt made from Carpenter 158 or 9310 and magnetic particle inspected, this is the kind of BCG you drop in and stop thinking about.
The real story here is the porting. Lantac's carrier uses patented shrouded, forward-facing gas ports that vent gas differently than a traditional carrier. In practice that means a flatter-shooting system with a smoother energy pulse and a softer start to carrier movement. It also runs cooler and cleaner, and it helps cut down on the extra upper-receiver pressure you get when running a can. The flared boss at the tail helps the bolt lock up more consistently in the barrel extension, which is a nice touch when you care about repeatable accuracy.
The entire carrier is finished in QPQ black nitride, a nitrocarburizing case-hardening process that leaves a hard, slick surface with strong corrosion resistance and a low friction coefficient. That translates to easier cleaning and less drag through the cycle. It ships with Lantac's CP-R360 domed cam pin machined from 17-4PH stainless and hardened to roughly 45 RC, which reduces wear inside the upper. Gas keys are sealed and properly staked at four points using grade 8 fasteners, so you're not chasing loose hardware down the road.
At right around 11.7 ounces, this carrier splits the difference between reliability and refinement. It's a smart pick for a dedicated 6mm ARC hunting or precision build, and it's just as at home in a suppressed setup where the cleaner, cooler operation really shows itself. Lantac backs it with a lifetime warranty.
Yes. This carrier is built specifically for 6mm ARC with a caliber-correct bolt and firing pin, so it drops right into a standard AR-15 pattern 6 ARC upper. Just make sure the rest of your upper is set up for the 6 ARC bolt face and you're good to go.
The big difference is the patented forward-facing, shrouded gas porting that vents gas differently than a mil-spec carrier. This gives you a flatter-shooting, smoother-cycling system that runs cooler and cleaner. The full-auto mass and flared boss also help with lock time and consistent lockup.
It's a strong choice for suppressed shooting. The forward porting and carrier shape help reduce the extra upper-receiver pressure that comes with running a can, and the added mass helps offset the increased cycling forces. Keep in mind it isn't a total fix for an over-gassed setup, so tuning your gas system still matters.
The QPQ black nitride surface is hard and slick, so carbon and fouling wipe off much easier than on a raw or phosphate carrier. A standard solvent, patch, and brush routine is all it takes. The low-friction coating also means you don't need to drown it in lube to keep it running smooth.
| UPC | 640117876770 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 01-UP-6ARC-NIT-EBCG |
| Length | 10.9500 |
You must be logged in to post a review.
Reviews
There are no reviews yet.