Description
Left-handed hunters usually get the short end of the stick when it comes to premium lightweight rifles, so it's worth paying attention when Proof Research builds one this good in a true LH configuration. The Elevation 2.0 in 25 Creedmoor starts with Proof's patented carbon fiber wrapped match-grade barrel in a Sendero contour, cut to 22 inches with a 1:7.5 twist. That fast twist matters here, because the 25 Creedmoor earns its keep launching long, high-BC .257 bullets that buck wind and hold energy way out past where most hunting cartridges start falling apart. Recoil stays mild, which makes it easy to spot your own hits.
What Makes the Elevation 2.0 Worth the Climb
The action is a Zermatt Arms Origin, the same one custom builders reach for when they want smooth bolt travel and consistent lockup without drama. A TriggerTech trigger handles the break, and it does so with the crisp, clean pull that brand has built its reputation on. Up top you get a single piece pinned rail, so your scope mounts once and stays put through rough country and rougher truck rides. The muzzle comes finished and threaded 5/8-24 with a thread protector, ready for your suppressor or brake with zero gunsmith work.
Built Light, Fed Simple
Instead of a detachable magazine, this rifle feeds from Hawkins Precision BDL bottom metal with a hinged floorplate in an M5 inlet. That keeps the belly of the stock slick for carrying, trims weight, and means there's no mag to lose or rattle in your pack. Depending on configuration, the Elevation 2.0 runs between roughly 5 pounds 14 ounces and 6 pounds 8 ounces bare, with a 13 5/8 inch length of pull that fits most frames well.
Elevation 2.0 25 Creedmoor Accuracy You Can Count On
Every one of these rifles is test fired before it leaves Montana, and Proof backs each with a Sub-MOA accuracy guarantee. The Tactical Flat Dark Earth carbon fiber stock looks sharp, sheds weather, and shrugs off the abuse a real backcountry season dishes out. For the southpaw who's tired of running a right-handed bolt, this one's a genuine treat.
Key Specifications
- Manufacturer: Proof Research
- Manufacturer Part Number: 148150
- UPC: 843068148150
- Action: Bolt Action, Zermatt Arms Origin (Left Hand)
- Caliber: 25 Creedmoor
- Barrel Length: 22 inches
- Barrel: Proof carbon fiber wrapped match-grade, Sendero contour
- Twist Rate: 1:7.5
- Muzzle: Threaded 5/8-24 with thread protector
- Trigger: TriggerTech
- Stock: Proof carbon fiber, Tactical Flat Dark Earth (TFDE)
- Bottom Metal: Hawkins Precision BDL hinged floorplate, M5 inlet
- Optics Base: Single piece pinned rail
- Bolt Knob: Modified ball
- Length of Pull: 13 5/8 inches
- Weight: Approx. 5 lbs 14 oz to 6 lbs 8 oz depending on configuration
What’s Included
- Proof Research Elevation 2.0 rifle
- Thread protector (installed on 5/8-24 threaded muzzle)
- Sub-MOA accuracy guarantee documentation
Frequently Asked Questions
Is the Proof Research Elevation 2.0 a true left-handed rifle?
Yes, this model is built on a left-hand Zermatt Arms Origin action, so the bolt handle and port are on the correct side for lefties. It's not a right-handed gun with a swapped stock. That makes cycling from the shoulder faster and far more natural for left-handed shooters.
Does the Elevation 2.0 use a detachable magazine?
No, this version feeds from Hawkins Precision BDL bottom metal with a hinged floorplate in an M5 inlet. That keeps the rifle slimmer and lighter for carrying in the field with no magazine to misplace. If you prefer a detachable box mag, Proof offers that setup on their Elevation MTR line.
What is 25 Creedmoor and why choose it for hunting?
The 25 Creedmoor is essentially a 6.5 Creedmoor necked down to shoot .257 caliber bullets, and it's become a favorite among western hunters. It pushes long, high-BC bullets that resist wind drift and shoot flat at extended range, all with mild recoil. Paired with this rifle's 1:7.5 twist barrel, it stabilizes the heavy-for-caliber bullets the cartridge was designed around.
Can I run a suppressor on the Elevation 2.0 25 Creedmoor?
Yes, the 22 inch barrel comes finished and threaded in the common 5/8-24 pattern with a thread protector included. That fits the vast majority of suppressors and muzzle brakes on the market, so there's no extra machine work needed before you mount your can.




Reviews
There are no reviews yet.