Description
The Weaver #63B is a one-piece top mount base built to give your scope a solid home on a wide range of classic lever actions and rimfires. It's machined from aluminum to tight tolerances, so it sits flat against the receiver and keeps your rings clamped down tight. If you've got a Marlin lever gun, a Mossberg 640, or an old Western Field 740 that came drilled and tapped but bare up top, this is the piece that gets glass on it.
What the #63B Base Fits
This base covers a serious spread of guns. It's set up for Marlin models including the 9, 45, 30AS, 36, 62, 93, 336 (all versions), 375, 444, 989, 922M, 1893, 1894, and 1895, plus the Glenfield 30, Zane Grey, and Camp 9 carbine. On top of that it works with the Mossberg 640 and the Western Field 740. Plenty of folks also run it on Henry Big Boy 30-30 and 45-70 rifles. Before you order, it never hurts to match your exact model and receiver against Weaver's application chart, since octagon-barrel and flat-top receivers can vary.
Why the Cross-Lock Design Matters
Recoil is the enemy of any scope mount, and the #63B is built to fight it. The base uses a square-cut notch that mates to the cross bolt in Weaver detachable rings, so instead of relying on friction alone, the ring physically locks into the base. That's a big deal on hard-kicking rounds like the 45-70 and 30-30, where a base that creeps will wreck your zero. Custom hardened fastening screws come in the package so you can bolt it down and trust it.
Getting Your #63B Mounted
Installation is straightforward for anyone comfortable with a screwdriver and a little thread locker. The gloss black finish matches up well with blued rifles and keeps things looking clean. Owners of older-eyed shooters and younger plinkers alike land on this base because it's a simple, dependable way to move from open sights to a scope. Depending on your rifle and how it's set up, a bit of shimming can help dial in perfect scope alignment, so it's worth a test fit before you torque everything down.
Key Specifications
- Manufacturer: Weaver
- Model: Top Mount Base #63B
- Manufacturer Part Number: 48069
- UPC: 076683480699
- Product Type: 1-Piece Base
- Style: Weaver Cross-Slot
- Material: Aluminum
- Color / Finish: Gloss Black
- Mount Type: To Receiver
- Action: Bolt / Lever Action
- Length: Approx. 8.05 in (packaged)
- Fits: Marlin, Mossberg 640, Western Field 740, Henry
What’s Included
- Weaver #63B one-piece top mount base
- Custom hardened fastening screws
Frequently Asked Questions
What rifles does the Weaver #63B base fit?
The #63B covers a wide list of Marlin models including the 9, 45, 30AS, 36, 62, 93, 336 (all models), 375, 444, 989, 922M, 1893, 1894, and 1895, along with the Glenfield 30, Zane Grey, and Camp 9. It also fits the Mossberg 640 and Western Field 740, and many people run it on Henry Big Boy 30-30 and 45-70 rifles. Since receiver dimensions vary, check your exact model against Weaver's mount application chart before ordering.
Does the Weaver 48069 base come with mounting screws?
Yes. Every #63B base ships with custom hardened fastening screws, so you have the hardware you need to bolt it to your receiver. A dab of thread locker on install is a good idea to keep everything holding tight under recoil.
What rings work with this #63B top mount base?
It uses the standard Weaver cross-slot design, so any Weaver-style detachable rings will lock right in. The square-cut notch mates with the cross bolt in the ring for a connection that resists recoil far better than clamp friction alone.
Will I need to shim the base for proper scope alignment?
In most cases it drops right on and lines up fine, but depending on your specific rifle and how it's drilled, a small shim can help fine-tune scope alignment. It's worth doing a test fit and checking your sight picture before you fully torque things down.




Reviews
There are no reviews yet.