Description
HEXMAG built its reputation on the PolyHex2 platform, and the HD line takes that same reliable magazine body and runs it through a hydro dip process to give it a Duck Camo pattern that most polymer mags simply don't offer. This isn't a spray paint job either. The pattern is applied through water transfer printing, where a printed film is floated on water and bonded directly onto the mag's surface, so the camo becomes part of the shell rather than a coating that flakes off after a season of use.
What Makes the HEXMAG HD Series 2 Different
Underneath the camo finish, this is a full Series 2 magazine through and through. That means redesigned feed lip geometry built to hold up to repeated loading and unloading, along with a deep catch pocket that keeps the mag seated solidly in the well instead of wobbling around. HEXMAG also added stripper clip guides along the spine, which comes in handy if you're topping off from stripper clips instead of loading rounds one at a time.
Built to Run, Not Just Look Good
Inside the mag you'll find a heat treated stainless steel spring designed to hold up under long term storage without losing tension, plus an anti-tilt follower that keeps rounds feeding straight into the chamber. The whole thing is molded from HEXMAG's PolyHex2 Advanced Composite, a polymer blend that's lighter than a lot of aluminum mags but still built to take a beating without cracking.
Fitting the HEXMAG HD S2 Duck Camo Into Your Rifle
This particular version holds 10 rounds inside a standard 30 round body, so it drops into AR-15, M4, M16 and other MSR pattern rifles without looking out of place or feeling awkward in a mag pouch. Because the capacity is set by an internal riser rather than a shortened body, it handles and reloads just like you'd expect from a full size magazine, just with a fixed round count built in.
Key Specifications
- Manufacturer: HEXMAG
- Model: PolyHex2 Series 2 HD
- Manufacturer Part Number: HX1030-AR15S2-DCP
- UPC: 850065662954
- Caliber: .223 Remington/5.56 NATO
- Capacity: 10 Rounds
- Magazine Body: Standard 30-round body with internal capacity riser
- Construction: PolyHex2 Advanced Composite polymer
- Finish: Hydro dipped Duck Camo Pattern (DCP)
- Spring: Heat-treated stainless steel
- Follower: Anti-tilt polymer follower
- Feed Lips: Redesigned Series 2 geometry
- Reload Feature: Integrated stripper clip guides
- Compatibility: AR-15, M4/M16 and other MSR-pattern rifles
- Country of Origin: Made in USA
What’s Included
- 1x HEXMAG HD Series 2 10-round AR-15 magazine, Duck Camo finish
Frequently Asked Questions
Will the HEXMAG HD S2 10RD Duck Camo magazine fit any AR-15?
It's built on the standard mil-spec magazine well pattern, so it drops into AR-15, M4 and M16 platforms without any modification. It also works in other MSR pattern rifles that accept standard AR-15 magazines. If your rifle takes standard PMAG or GI style mags, this one will fit right in.
Does the Duck Camo hydro dip finish hold up over time?
The hydro dip process bonds the printed film directly onto the magazine body rather than just coating the surface, which helps it resist chipping and fading better than a painted finish. It's applied over the same PolyHex2 body used on HEXMAG's standard Series 2 mags, so the toughness underneath is unchanged. You still get the durability of the original mag with a finish that looks sharp in a mag pouch or on the range.
Why is this a 10 round magazine if it uses a 30 round body?
HEXMAG uses an internal riser system inside the standard sized body to limit capacity to 10 rounds while keeping the same footprint as a full size mag. That means it fits your rifle and mag pouches exactly like a 30 round version would. It's a common setup for shooters who want the standard look and feel without the higher round count.
What's different about Series 2 compared to older HEXMAG designs?
Series 2 magazines feature redesigned feed lip geometry for better strength and smoother feeding, along with a deeper catch pocket for a more secure fit in the magwell. HEXMAG also added stripper clip guides for faster reloading and upgraded to a heat treated stainless steel spring for longer storage life. These changes were aimed at improving reliability over earlier generations of the mag.






Reviews
There are no reviews yet.