Description
The Leupold BackCountry ringmount takes the guesswork out of topping off a Savage 10/110 round receiver. Instead of a separate base and ring stack, you get an integrated design that mounts directly to your receiver, cutting out a connection point that can shift or work loose over time. That means fewer parts, a lower profile, and one less thing to worry about when your rifle is taking a beating in the field.
Why the BackCountry Mount Earns Its Spot on a Hunting Rifle
These ringmounts are machined from 7075-T6 aircraft-grade aluminum, which is what gives the BackCountry series its reputation as one of Leupold's lightest and toughest mounting options. A milled-in recoil lug and low-profile keeper screw keep your scope locked in place and holding zero shot after shot. At the 30mm High setting, you get plenty of clearance for larger objective bells and bigger turret housings without forcing your scope up any higher than it needs to be.
Getting the Leupold BackCountry Set Up Right
This is a two-piece setup designed specifically for the Savage 10/110 round receiver, so it drops right onto the factory drill-and-tap pattern. Leupold includes both 8-40 and 6-48 screws in the box, so you're covered whether your receiver is set up for the standard or the beefier 8-40 pattern. Once it's torqued down and your rings are lapped, you've got a mount that stays put and holds your scope in true alignment.
Built to Match Any 30mm Scope
The rings accept any riflescope with a 30mm maintube, so you're not locked into a single optic. Whether you're running a lightweight hunting scope or something with a bit more magnification for reaching out, this mount gives you a dependable foundation. Made in the USA and backed by Leupold's reputation for gear that survives a lifetime of hard use, it's a smart pick for anyone building out a backcountry Savage.
Key Specifications
- Manufacturer: Leupold
- Model: BackCountry
- Manufacturer Part Number: 187355
- UPC: 030317051471
- Fits: Savage 10/110 Round Receiver
- Ring Diameter: 30mm
- Ring Height: High (1.19 in)
- Base Configuration: 2-Piece Ringmount
- Material: 7075-T6 Aluminum
- Finish: Matte Black
- Base Cant: None (0 MOA)
- Weight: 2.9 oz
- Screws Included: 8-40 and 6-48
- Product Type: Ring / Direct Thread
- Country of Origin: Made in USA
What’s Included
- Two-piece BackCountry ringmount set
- 8-40 mounting screws
- 6-48 mounting screws
Frequently Asked Questions
What rifles does this BackCountry ringmount fit?
This mount is built specifically for the Savage 10/110 round receiver and attaches directly to the factory drill-and-tap pattern. It is not designed for flat-back Savage receivers or other rifle actions. If your Savage has the round receiver, this is the correct fit.
Will these rings hold a 30mm scope?
Yes, the rings accept any riflescope with a 30mm maintube. If your optic has a 1-inch tube, you'll want the matching 1-inch version of this mount instead. Always confirm your scope's tube diameter before ordering rings.
What screws come with the Leupold BackCountry mount?
Both 8-40 and 6-48 screws are included in the box. That covers you whether your Savage receiver is set up for the standard 6-48 pattern or the heavier-duty 8-40 pattern, which is popular for hard-recoiling and long-range builds.
How much does the High ring height give me?
The High setting comes in around 1.19 inches, which provides good clearance for larger objective lenses and bigger turret housings. If you're running a big scope with a 50mm or larger objective, the High rings help keep that bell off the barrel. For smaller objectives, you may prefer the Medium option.



Reviews
There are no reviews yet.