Description
The Leofoto STO-362CX flips the script on traditional tripod design by running its carbon fiber legs upside down, putting the beefy 40mm tubes at the bottom and the 36mm tubes up top. That inverted layout drops the center of gravity and gives you a wider, more planted footprint, which translates to a steadier platform when you're stretching out a long-range rifle or a heavy chassis gun. The two-section legs collapse and deploy in a hurry, so you're not fumbling with a fistful of twist locks when a shot window opens up.
What Sets the STO-362CX Apart
This is the integrated ball head version of the lineup, meaning the low-profile inverted lever-control ball head is built right into the apex and doesn't come off. That keeps the whole rig compact and dialed in specifically for rifle work. It runs a hybrid clamp with separate Picatinny and Arca controls, so you can lock in a rifle, an Arca rail, or accessories without swapping hardware. The knurled-bar angle stop is the standout on the newer "X" version, letting you drop or spread a leg one-handed while your other hand stays on the gun.
Built From Toray Carbon and 6061-T6
The legs are layered from ten wraps of Toray carbon fiber, which is where a lot of the torsional rigidity and vibration dampening comes from. You get three independent leg angle positions and a single-twist locking mechanism that keeps the legs evenly spread and prevents them from creeping inward mid-shot. The non-crossing leg tubes are a nice touch too, since they simplify setup and let you get low without the legs fighting each other.
Ready for the Backcountry
Rubber feet come standard for hard surfaces and stability on the range, and a set of steel spiked feet is included for digging into soft ground or dirt. With a max load rating up to 88 pounds, there's plenty of headroom for heavy precision rifles, and the inverted sand-proof design keeps grit out of the locking joints when you're working out of a pack. Field feedback has been strong on how quickly it deploys and how solid it feels once it's planted.
Key Specifications
- Manufacturer: Leofoto USA
- Manufacturer Part Number: STO-362CX
- UPC: 6940828319417
- Leg Material: 10-Layer Toray Carbon Fiber
- Apex/Spider Material: 6061-T6 Aluminum Alloy
- Leg Sections: 2
- Leg Tube Diameters: 36mm / 40mm (Inverted)
- Head: Integrated Inverted Lever-Control Ball Head (Non-Removable)
- Clamp: Hybrid Arca / Picatinny
- Leg Angle Positions: 3 Independent Locking Positions
- Max Load Capacity: Up to 88 lb
- Feet: Rubber Feet with Steel Spike Set
What’s Included
- STO-362CX inverted carbon fiber tripod with integrated ball head
- Hybrid Arca/Picatinny clamp
- Rubber feet (installed)
- Steel spiked feet set
- Padded carrying case
Frequently Asked Questions
What makes the STO-362CX legs inverted, and why does it matter?
The legs run the widest 40mm tubes at the bottom and the 36mm tubes up top, which is the opposite of a standard tripod. That drops the center of gravity and gives you a more stable, planted stance for precision rifle work. It also lets the legs collapse and deploy faster, and it keeps grit and debris out of the locking joints.
Does the ball head come off the STO-362CX?
No. This model has a built-in, non-removable inverted lever-control ball head at the apex. That design keeps the whole setup compact and optimized specifically for rifle shooting rather than glassing with a spotting scope.
Can I mount both Picatinny and Arca rifles on it?
Yes. The STO-362CX uses a hybrid clamp with separate Picatinny and Arca controls, so you can lock in a rifle, an Arca rail, or accessories without swapping out hardware. It gives you flexibility across different setups on the same tripod.
How much weight can the STO-362CX hold?
It carries a max load rating up to 88 pounds, which is far more than most precision rifles will ever demand. That headroom means it stays rock-solid even with a heavy chassis gun clamped in and gives you confidence when you're leaning into the shot.





Reviews
There are no reviews yet.