Description
This 0.215-inch RCBS steel neck sizing bushing is one of those small parts that punches way above its weight on the loading bench. Drop it into your RCBS Gold Medal Match bushing die and it lets you set the exact amount of grip on the bullet instead of trusting a fixed-diameter die to guess for you. The result is more uniform neck tension round to round, which is where consistent velocities and tighter groups start.
Why the 0.215" Bushing Earns Its Keep
Sizing only what the neck actually needs means you stop overworking the brass. Less work hardening translates to more firings before a case splits or needs annealing, and that adds up fast if you shoot a lot. The bushing is self-centering, so it aligns itself with the case neck as it works, and the sizing surface is hand-polished to keep the effort low and the finish smooth. Precision reloaders and benchrest folks have leaned on this style of changeable bushing for years for exactly that reason.
Getting the Right Fit With Your 0.215 Steel Neck Bushing
Picking a size is straightforward. Measure the outside neck diameter of a loaded round and subtract .002 to .003 inches, which leaves about a thousandth of brass springback for proper tension. Or measure your neck wall thickness, multiply by two, add your bullet diameter, and subtract .001. Both roads land in the same place. RCBS suggests keeping a bushing or two above and below your target on hand so you can fine-tune tension without a reorder.
One thing worth knowing up front: these steel bushings come in-the-white, meaning bare steel with no coating, so run case lube when you size. You will get the most out of them paired with quality brass that has consistent neck walls, since the bushing can only be as uniform as the brass you feed it. For anyone loading serious rifle ammo on Gold Medal Match dies, it is a cheap way to buy real accuracy.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 81530
- UPC: 076683815309
- Bushing Diameter: 0.215"
- Material: Heat-treated steel, in-the-white (uncoated)
- Surface Hardness: Rc 60-62, hand-polished sizing surface
- Design: Self-centering, changeable neck bushing
- Compatibility: RCBS Gold Medal Match bushing sizing dies
- Sold As: Single bushing
What’s Included
- One RCBS 0.215" steel neck sizing bushing
Frequently Asked Questions
What dies does the 0.215" steel neck sizing bushing work with?
It's built for RCBS Gold Medal Match bushing-style sizing dies and works in both the full-length and neck-sizing versions of those dies. It is not designed to fit standard non-bushing dies from other makers, so make sure your die is a bushing die before ordering.
How do I know if 0.215 is the right bushing size for me?
Measure the outside neck diameter of a loaded cartridge and subtract .002 to .003 inches, which allows roughly a thousandth of springback for proper tension. You can also measure neck wall thickness, multiply by two, add your bullet diameter, and subtract .001. If both methods point near .215, you're in the right spot, and it's smart to keep a size above and below on hand for tuning.
Do I need to lube cases with the steel neck bushing?
Yes. These bushings come in-the-white as bare steel with no coating, so traditional case lube is required when sizing. Proper lubrication also keeps the bushing sizing smoothly and helps it last for a very long service life.
Will this bushing actually improve my accuracy?
It can, because it lets you set consistent neck tension and stops the die from overworking the brass. You'll see the biggest gains when it's paired with quality brass that has uniform neck wall thickness, since the bushing can only size as evenly as the necks you feed it. On its own it's one piece of the accuracy puzzle, but it's an important one for precision rifle loads.



Reviews
There are no reviews yet.