Description
The UTG Low Mount for RMR Footprint solves a common headache: getting your red dot down where your eye naturally wants it. With a 0.40-inch saddle height, this low profile Picatinny mount sits your optic close to the rail, which makes a real difference on shotguns and rifles where the stock isn't lined up with the bore. That lower position gives you a comfortable cheek weld and a natural sight picture, so you're not craning your neck to find the dot.
It's built from 6061-T6 aircraft grade aluminum and finished in a matte black anodize, with strategic lightening cuts that shave weight without giving up strength. The whole thing is precision CNC machined, and at just 1.78 inches long and 1.1 inches wide, it stays out of the way and keeps your setup trim.
What the UTG RMR Low Mount Fits
This mount uses the full-size Trijicon RMR footprint, which is one of the most widely shared patterns out there. That means it plays nicely with the Trijicon RMR and SRO, plus popular Holosun optics like the 407C, 507C, 508T, and 507 Comp. Folks have run this mount on everything from Mossberg shotguns to lever guns, so if your optic wears the RMR footprint and your firearm has a top Picatinny rail, you're in good shape.
Locking Down Your Zero
What separates a good mount from a frustrating one is whether it holds zero, and UTG addressed that with locking Torx screws and square-shaped integral recoil stops. Those recoil stops physically brace against the rail so the mount doesn't creep under recoil. UTG recommends torquing the #6-48 optic screws to around 12 inch-pounds and the side plate screw to about 35 inch-pounds, and it's worth noting you should only use the included #6-48 screws for optic installation. It ships with the mounting screws and install tools you need, so you can get it dialed in without a trip to the hardware store.
Key Specifications
- Manufacturer: Leapers / UTG
- Manufacturer Part Number (MPN): MT-RMRXS
- Model: Picatinny Optic Mount
- UPC: 4717385553088
- Optic Footprint: Full-Size Trijicon RMR
- Saddle Height: 0.40 in
- Rail Type: Picatinny
- Material: 6061-T6 Aircraft Grade Aluminum
- Finish: Matte Black Anodize
- Length: 1.78 in
- Width: 1.1 in
- Color: Black
- Product Type: Mount
What’s Included
- UTG Low Profile RMR Footprint Picatinny Mount
- RMR mounting screws (#6-48)
- Installation tools
Frequently Asked Questions
Which optics fit the UTG Low Mount for RMR Footprint?
It's cut for the full-size Trijicon RMR footprint, so it fits the Trijicon RMR and SRO along with Holosun optics that share that pattern, including the 407C, 507C, 508T, and 507 Comp. It does not fit the smaller RMSc or K-series footprint optics like the Holosun 407K, 507K, or the Trijicon RMRcc. Always double-check your optic's footprint before ordering.
How low does this mount position the red dot?
The saddle height is 0.40 inches, which is a genuinely low position. That height is designed to give you a comfortable cheek weld and correct sight alignment on shotguns and rifles with stocks that aren't in line with the bore. It's not meant for AR co-witness with iron sights, so if you need that, UTG makes a taller 0.87-inch version.
Will this UTG mount hold zero under recoil?
It uses locking Torx screws paired with square-shaped integral recoil stops that brace against the Picatinny rail to keep the mount from shifting. UTG recommends torquing the optic screws to around 12 inch-pounds and the side plate screw to about 35 inch-pounds for a solid hold. Users running it on shotguns and rimfire rifles report it stays put and installs easily.
What comes with the UTG RMR footprint mount?
The mount ships with the #6-48 optic mounting screws and the installation tools needed to get it set up. Just make sure to use only the included #6-48 screws when attaching your optic, since the wrong screw length can damage the sight.




Reviews
There are no reviews yet.