Description
This combo pairs Leofoto's SO-362CX inverted carbon fiber tripod with the LB-75LRC lever-release leveling head, and it's built for people who want a stable platform they can throw down quick and trust under real weight. The star of the show is that inverted leg design, where the fattest tube sits at the bottom and the legs don't cross when they collapse. That means you pop it open, spread the legs, and you're shooting instead of fiddling with a stack of twist locks every time you move.
What the SO-362CX Tripod Brings to the Field
The legs are made from 10 layers of Toray carbon fiber, so you get serious rigidity without a boat anchor hanging off your pack. It stands up to roughly 64 inches at full height and folds down to about 39 inches, weighs in around 4.8 pounds, and the 32/36mm tubes shrug off a rated load up to 88 pounds. That headroom is why guys run full-length chassis rifles with a spotting scope hanging off it and never feel it flex. The X version angle stop uses a knurled bar you can work one handed, and there are three locking leg positions plus independent spread so you can get level even when the ground is anything but.
Why the LB-75LRC Leveling Head Matters
The LB-75LRC sits in the 75mm bowl and gives you a half-ball leveling range of plus or minus 15 degrees. Twist the big butterfly handle and it locks tight, so getting a level reticle on sloped terrain takes a second instead of a whole setup routine. Up top it wears a hybrid Arca and Picatinny lever-release clamp, which means your rifle or optic snaps on and comes off with a flip of the lever, no threading anything down. The CNC-machined aluminum body keeps it light at under a pound while still handling up to 55 pounds.
Between the interchangeable 75mm bowl and platform, swappable rubber and spiked feet, and that quick-release head, this thing adapts to positional matches, glassing sessions, or a heavy spotter on a ridge. It's one of those setups you buy once and quit thinking about.
Key Specifications
- Manufacturer: Leofoto USA
- Manufacturer Part Number: SO-362CX+LB-75LRC
- UPC: 6940828317147
- Leg Material: 10-Layer Toray Carbon Fiber
- Leg Sections: 2 (Inverted)
- Leg Tube Diameter: 32mm / 36mm
- Max Height: Approx. 64.5 in (1638mm)
- Min Height: Approx. 5.4 in (138mm)
- Folded Length: Approx. 39.4 in (1000mm)
- Tripod Weight: Approx. 4.8 lb (2.17kg)
- Tripod Max Load: 88 lb (40kg)
- Bowl Size: 75mm (Interchangeable Bowl + Platform)
- Leveling Head: LB-75LRC, Half-Ball +/- 15 degrees
- Head Clamp: Hybrid Arca + Picatinny Lever-Release
- Head Max Load: 55 lb (25kg)
- Head Weight: Approx. 0.88 lb (400g)
What’s Included
- SO-362CX inverted carbon fiber tripod
- LB-75LRC leveling head with Arca + Picatinny lever-release clamp
- 75mm video bowl
- 3/8" stud platform plate
- Rubber feet (installed)
- Steel spiked feet set
- Padded carry case with shoulder strap
- Allen wrench set
Frequently Asked Questions
What makes the inverted leg design on the SO-362CX worth it?
With inverted legs the widest tube sits at the bottom and the legs don't cross when they fold, so the whole thing collapses and deploys much faster than a standard tripod. You spread the legs and you're ready, which is a big deal at positional matches where you're moving between stages. It also adds stability since the beefiest section carries the load down low.
Does the LB-75LRC head work with Arca and Picatinny mounts?
Yes, the LB-75LRC uses a hybrid lever-release clamp that grabs both Arca dovetails and Picatinny rails. Flip the lever and your rifle, optic, or spotter drops on or comes off in a second, no threading required. It also gives you plus or minus 15 degrees of leveling to square up your reticle on sloped ground.
How much weight can this Leofoto tripod combo actually hold?
The SO-362CX tripod itself is rated up to 88 pounds, and the LB-75LRC leveling head handles up to 55 pounds. That means you can run a full-length chassis rifle with a spotting scope attached and it stays planted with no flex. Plenty of owners run precision rifles well over 20 pounds on it without a second thought.
Can I use this for glassing and cameras too, not just rifles?
Absolutely. The load capacity and stable base make it great for large spotting scopes, cameras, and even bigger surveillance-style optics. The interchangeable 75mm bowl and platform let you swap in different heads, so it flexes between shooting and glassing duty easily.




Reviews
There are no reviews yet.