0
0

TRICER RP Rifle Bipod RP-BIP-1 | Ultralight Carbon Fiber Hunting Bipod

UPC: 860013448202

$349.00

24 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The TRICER-RP earned its reputation as one of the most versatile hunting bipods you can strap to a rifle, and it does that by giving you two leg configurations in one package. Run the three-section long legs and you can reach a max shooting height of 30.2 inches for kneeling or sitting behind glass on a ridgeline. Swap to the two-section short legs and you drop down to a 12-inch prone setup with the whole rig weighing right around 10.58 oz. Fully built with the long legs it still only tips the scale at 14.25 oz, so it disappears in a pack and won't drag the front of your rifle down on a long climb.

What Makes the TRICER RP Different

The inverted carbon fiber leg design is the trick behind the stability. Instead of the flex you get from cheaper bipods, the legs push back against your load and hold the reticle steady. Four leg angle positions let you set up flat on hard ground or splay the legs wide to clear brush, sagebrush, or an awkward sidehill. The twist locks make height changes quick, and once they're set, everything stays put.

Dialing In the RP Bipod

Up top you get a tilt lock lever and a 360-degree pan locking knob. That means you can level the bubble before you break the shot, then loosen the pan knob to track a moving animal without lifting your cheek off the stock. Lock it back down for full precision when you need a steady follow-up. It's the kind of control that makes a real difference on uneven terrain where time is short.

Mounting the TRICER RP to Your Rifle

This is a true all-in-one kit. It ships with both an Arca-Swiss head and a Picatinny head, plus a swivel stud-to-Picatinny adapter so it bolts up to just about any rifle, from a modern chassis gun to an old wood-stocked deer rifle with a sling stud. You also get both spiked and rubber feet, so you're covered whether you're on rock, dirt, or a shooting bench. Between the leg swaps, the mounting options, and the feet, this really can be the one bipod that handles the whole season.

Key Specifications

  • Manufacturer: TRICER
  • Manufacturer Part Number: RP-BIP-1
  • UPC: 860013448202
  • Leg Material: Carbon Fiber
  • Weight (3-Section Legs): 14.25 oz
  • Weight (2-Section Legs): 10.58 oz
  • Long Leg Height Range: 8 to 30.2 in
  • Short Leg Height Range: 6 to 12 in
  • Leg Angle Positions: 4
  • Mounting Options: Arca-Swiss and Picatinny heads, swivel stud adapter
  • Feet: Interchangeable spiked and rubber
  • Head Controls: Tilt lock lever and 360-degree pan knob
  • Finish: Matte Black

What’s Included

  • TRICER RP Carbon Fiber Bipod
  • Pair of three-section (long) legs, 8-30 in
  • Pair of two-section (short) legs, 6-12 in
  • Arca-Swiss head
  • Picatinny head
  • Swivel stud-to-Picatinny adapter
  • Spiked feet
  • Rubber feet

Frequently Asked Questions

How tall does the TRICER RP bipod get?

With the three-section long legs installed, the RP reaches a maximum shooting height of 30.2 inches, which is tall enough for comfortable kneeling and sitting shots. Swap to the two-section short legs and it tops out at 12 inches for a low prone setup. That range covers most field positions you'll run into on a hunt.

Will the TRICER RP mount to my rifle?

Yes, in most cases. The RP comes with both an Arca-Swiss head and a Picatinny head, plus a swivel stud-to-Picatinny adapter, so it fits chassis rifles, Picatinny rails, and traditional stocks with a sling stud. Note that the swivel stud adapter is not compatible with a handful of models including certain Christensen Arms Ridgeline, Weatherby Vanguard, Browning X-Bolt, Bergara, and Browning Hells Canyon rifles, so check your stud location first.

How much does the TRICER RP bipod weigh?

Built with the long three-section legs, the RP weighs about 14.25 oz. Configured with the short two-section legs it drops to roughly 10.58 oz. Either way it's light enough to carry all day in a backcountry pack without weighing down the front of your rifle.

Can you pan and level with the TRICER RP?

Yes. The head features a tilt lock lever and a 360-degree pan locking knob, so you can level the bubble before the shot and track a moving target without breaking your cheek weld. Lock the pan down when you want the rifle held completely still for a precise shot.

Additional information

UPC

860013448202

Manufacturer

Manufacturer Part Number

RP-BIP-1

Reviews

There are no reviews yet.

Be the first to review “TRICER RP Rifle Bipod RP-BIP-1 | Ultralight Carbon Fiber Hunting Bipod”