Description
A hot suppressor will melt your sling, wreck your pack, and give you a burn you will remember for weeks. The Burn Proof Gear Suppressor Cover Heavy in Flat Dark Earth is built to put a stop to all of that, and this one is cut at 7 inches by 1.6 inches to wrap the SilencerCo Omega 36M. It also knocks down mirage coming off the can, so your optic stays usable when the round count climbs instead of turning your target into a heat wave.
How the Omega 36M Heavy Cover Handles Heat
This is a two-part system, and that matters more than it sounds. The inner liner is a high-temp fiberglass mesh sleeve rated to 2000 degrees Fahrenheit that sits directly against the suppressor body. Over that goes the outer cover, made from fire retardant Kevlar fabric that is good to 1000 degrees, which works out to roughly 180 rounds of M855 fired hard, including full auto. When the inner sleeve eventually wears out from repeated heat cycles, you replace just the sleeve instead of buying a whole new cover. It is a smart way to stretch the life of the gear.
A No-Slip Fit on Your Omega 36M
Burn Proof Gear cuts these covers a half inch longer than the suppressor they are meant for, so the ends cinch down around the front and rear of the can. That is the backbone of their no-slip fit, and it is why these covers stay put through mag dumps, barricade work, and rough handling where cheaper wraps start walking forward toward the muzzle. A shifting cover is more than an annoyance on a rifle, so this design detail earns its keep.
These covers are made in the USA from fully fire retardant materials, carry a patented design, and are backed by a lifetime guarantee. They have earned a strong reputation with military and hard-use rifle crowds for a reason. If you run an Omega 36M and shoot it like you mean it, this is the cover to put on it, and the FDE color blends right in with earth-tone builds.
Key Specifications
- Manufacturer: Burn Proof Gear
- Manufacturer Part Number: BPG-SCC-H-7-1-6-FDE
- UPC: 680660790703
- Fits: SilencerCo Omega 36M
- Cover Length: 7 in
- Cover Diameter: 1.6 in
- Color: Flat Dark Earth (FDE)
- Outer Material: Fire retardant DuPont Kevlar fabric
- Outer Heat Rating: 1000°F, full auto capable
- Inner Liner: High-temp fiberglass mesh sleeve
- Inner Heat Rating: 2000°F
- Construction: Two-piece system with replaceable inner sleeve
- Country of Origin: USA
- Warranty: Lifetime guarantee
What’s Included
- Burn Proof Gear Heavy outer suppressor cover, FDE
- Fire retardant inner mesh sleeve
Frequently Asked Questions
Will this Burn Proof Gear cover fit my Omega 36M?
This version is cut at 7 inches long with a 1.6 inch diameter, sized for the SilencerCo Omega 36M. Burn Proof Gear builds their covers a half inch longer than the can so the ends cinch around the front and rear for a secure, no-slip hold. If you run your 36M in a different configuration, double check your assembled length before ordering.
Is the Omega 36M Heavy suppressor cover rated for full auto fire?
Yes, the Heavy cover in FDE, Black, or Wheat Tan uses Kevlar fabric rated to 1000 degrees Fahrenheit, which works out to roughly 180 rounds of M855 fired hard. The inner fiberglass sleeve handles up to 2000 degrees. Just let the cover cool completely before handling it or stowing the rifle.
What happens when the inner sleeve wears out?
That is the beauty of the two-piece design. The inner fire retardant sleeve takes the direct heat and can be replaced on its own when it wears down from repeated heat cycles. You keep the Kevlar outer cover and just swap in a fresh sleeve, which saves money over the life of the gear.
Does a suppressor cover really reduce heat mirage?
It does. A bare can shedding heat straight up into your line of sight creates shimmer that blurs your target through a magnified optic. Insulating the suppressor with a cover like this keeps that heat wave down so you can keep shooting accurately during longer strings.



Reviews
There are no reviews yet.