0
0

Strike Industries Barrel Thread Protector 1/2×28 Blue Anodized

UPC: 708747546828

$13.99

8 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

A threaded barrel without a muzzle device on it is basically an invitation for trouble. Dust, dirt, a bump on the truck floor, a drop during cleaning, any of that can chew up those delicate threads or ding the crown, and once that happens accuracy starts to suffer. Strike Industries built this thread protector to close that gap. It's a small, machined aluminum cap that threads onto a standard 1/2"-28 barrel and keeps everything underneath it safe until you're ready to run a brake, comp, or flash hider.

What the Blue Thread Protector Is Made From

This piece is machined from 6061-T6 aluminum, which is the same grade of billet used in a lot of higher end AR parts, then finished with a blue anodized coating for a bit of color against an otherwise all-black build. The faceted exterior isn't just for looks either, it gives you enough grip to snug it down by hand and back it off later without needing a wrench or any special tool. At right around a quarter ounce, you won't even notice it's there.

Why You'd Want This On Your AR Platform Rifle

Maybe you're still shopping around for the right muzzle device and don't want bare threads exposed in the meantime. Maybe you want to see what your barrel shoots like without anything hanging off the end of it before you commit to a brake or comp. Or maybe you're running the rifle without a muzzle device long term and just want the threads capped off and protected during storage, cleaning, or transport. This thread protector covers all three situations without adding bulk or changing the way your rifle handles.

Fit and Finish on the 1/2×28 Threaded Protector

The blue anodizing on this one is done right, with a clean, even coat that holds up to normal handling. It's built specifically for 223 Rem/5.56x45mm NATO AR platform rifles with standard 1/2"-28 threading, so if that's what your barrel is cut for, this will thread right on. It's a simple part, but it's one of those small details that can tie a color scheme together while doing real, practical work protecting your barrel.

Key Specifications

  • Manufacturer: Strike Industries
  • Manufacturer Part Number: BCTPBLU
  • Model: Barrel Thread Protector
  • UPC: 708747546828
  • Product Type: Thread Protector
  • Material: 6061-T6 Aluminum
  • Finish: Blue Anodized
  • Thread Pattern: 1/2"-28 tpi
  • Caliber Compatibility: 223 Rem/5.56x45mm NATO AR Platform
  • Weight: 0.25 oz
  • Length: 0.786 in
  • Outer Diameter: 0.7 in
  • Bore Diameter: 0.275 in

What’s Included

  • 1 x Strike Industries Barrel Thread Protector (BCTPBLU)

Frequently Asked Questions

What does the Strike Industries Barrel Thread Protector actually protect?

It threads onto your barrel and covers the exposed 1/2×28 threads so they don't get dinged, cross-threaded, or fouled up with debris while you're not running a muzzle device. It won't cover the muzzle crown itself since that sits behind the threads, but keeping the threads clean and undamaged means your next muzzle device installs smoothly.

Will this fit any AR-15 barrel?

It's built for standard 1/2"-28 tpi threaded barrels chambered in 223 Rem/5.56x45mm NATO, which covers the vast majority of AR-15 platform rifles. If your barrel came factory threaded for a muzzle device in that caliber, this should thread right on.

Do I need any tools to install the thread protector?

No tools needed. The faceted exterior gives you enough grip to turn it on and off by hand, just thread it on clockwise until it seats snugly and don't overtighten it since finger-tight is all it needs.

Can I shoot with this thread protector still on the barrel?

Yes, it's designed to be shot through if you want to test your barrel's accuracy without a muzzle device attached, or if you just prefer running it bare for a while. It won't interfere with the bullet path or your point of impact.

Additional information

UPC

708747546828

Manufacturer

Manufacturer Part Number

BCTPBLU

Model

Product Type

Thread Protector

Thread Pattern

1/2"x28

Reviews

There are no reviews yet.

Be the first to review “Strike Industries Barrel Thread Protector 1/2×28 Blue Anodized”