0
0

RPM Precision 35mm Low .885″ Scope Rings, Co-Linear Level, FDE

UPC: 850063702379

$199.99

5 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Ruff's Precision Manufacturing built these 35mm rings around one clever idea: put the bubble level where you can actually use it. The co-linear "bubble-on-bottom" design sits in the lower half of the ring and aligns with your receiver once mounted, so it reads the true cant of your platform. You get a quick visual reference with your non-dominant eye while staying in your shooting position, no breaking cheek weld and no second-guessing a level clamped somewhere else on the rail.

This is the low profile version, positioning the center of your scope tube .885" above the base, and it comes finished in Flat Dark Earth. The rings clamp to any standard Picatinny rail and are machined from 6061-T6 aluminum with a 303 stainless steel cross bolt and nut for a corrosion-resistant, secure hold. An integrated alignment lug keeps the cap and base lined up during install, which takes a lot of the guesswork out of getting everything square.

Why the Co-Linear Level on These RPM Rings Matters

Cant is one of those small errors that snowballs downrange. A slight tilt you'd never notice by eye can push you off target at distance, and the further you stretch, the worse it gets. Because the level on these rings reads your platform directly, you can confirm the rifle is level before you press the trigger and while mounting the optic in the first place. That means no juggling multiple small levels or balancing acts on the bench.

Getting the Most From the RPM 35mm Low Ring Set

Mounting is straightforward: level the rifle, set your scope and eye relief, then torque to spec. RPM calls for 18 in/lbs on the cap screws and 45 in/lbs on the cross bolt, and those numbers are printed right on the packaging so you're not hunting for a spec sheet. A quality torque driver is worth using here to seat everything evenly without overdoing it on the tube. These are a solid pick for precision shooters, long-range hunters, and anyone running a 35mm optic who wants a repeatable, level foundation.

Key Specifications

  • Manufacturer: Ruff's Precision Manufacturing (RPM)
  • Manufacturer Part Number: CLR-35885-FDE
  • UPC: 850063702379
  • Ring Diameter: 35mm
  • Ring Height: Low (.885" tube center height)
  • Color / Finish: Flat Dark Earth (FDE)
  • Ring Body Material: 6061-T6 aluminum
  • Cross Bolt Hardware: 303 stainless steel cross bolt and nut (1/2")
  • Rail Compatibility: Picatinny
  • Integrated Level: Co-linear bubble-on-bottom design
  • Cap Screw Torque: 18 in/lbs
  • Cross Bolt Torque: 45 in/lbs
  • Approx. Weight (Low): 3.9 oz
  • Country of Origin: Made in the USA

What’s Included

  • Set of 2 RPM Precision 35mm low scope rings (Flat Dark Earth)
  • Integrated co-linear bubble level
  • 303 stainless steel cross bolts and nuts

Frequently Asked Questions

What makes the co-linear bubble level on the RPM 35mm rings different from a normal anti-cant level?

The level is built into the bottom half of the ring so it aligns with your receiver and reads the actual cant of your platform once mounted. You can see it with your non-dominant eye without lifting your head off the scope, which most top-mounted levels can't do. It also doubles as a mounting aid, giving you a true reference while you square up the optic.

Will these low .885" rings work with my scope and rail?

They're made for scopes with a 35mm main tube and clamp onto any standard Picatinny rail. The low height sets the center of the tube at .885" above the base, which suits many low-mounted precision and hunting setups. Just make sure your objective bell and any turrets clear the barrel and rail at that height before you commit.

What torque specs should I use when mounting the RPM 35mm rings?

RPM lists 18 in/lbs on the cap screws and 45 in/lbs on the 1/2" cross bolt, and those numbers are printed right on the packaging. Using a quality torque wrench is the way to go so you get an even, secure hold without deforming the scope tube. Level the rifle, set eye relief, then work the cap screws down evenly in a crisscross pattern.

Are these rings made in the USA?

Yes, Ruff's Precision Manufacturing builds them in the USA from 6061-T6 aluminum with 303 stainless steel hardware. The alignment lug and machined construction are aimed at giving you a repeatable, solid mount that holds zero under recoil.

Additional information

UPC

850063702379

Manufacturer

Manufacturer Part Number

CLR-35885-FDE

Reviews

There are no reviews yet.

Be the first to review “RPM Precision 35mm Low .885″ Scope Rings, Co-Linear Level, FDE”