0
0

RPM CLR-34125-FDE Precision 34mm High 1.25″ Scope Rings FDE

UPC: 850063702348

$199.99

7 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The RPM CLR-34125-FDE is a set of two 34mm scope rings built around one clever idea: a co-linear bubble level worked right into the ring itself. Instead of clamping an external level onto your scope tube or balancing multiple bubbles during setup, you get a single reference point that sits in your sightline. With a quick look from your non-dominant eye, you can check your cant without ever lifting your head off the stock. For anyone stretching shots out to distance, that matters, because even a small amount of cant throws your point of impact off the further you go.

What Sets the CLR-34125-FDE Apart

The integrated level does double duty. During mounting it gives you a clean reference to level the rifle and scope together, so you skip the juggling act of small levels and clamps. Out in the field it becomes a fast pre-shot check. These are the high-height version, positioning the center of the scope tube 1.25 inches above the base, which gives you the clearance needed for larger objective bells and bigger 34mm tactical optics like the Nightforce ATACR, Vortex Razor, and similar glass.

Build Quality on the RPM 34mm High Rings

Ruff's Precision Manufacturing machines these from 6061-T6 aluminum for both the ring body and cap, paired with a 303 stainless steel cross bolt and nut. An alignment lug keeps the cap and base squared up while you run the cap screws, which helps everything seat true. The whole set is made in the USA and finished in Flat Dark Earth to match FDE rifles and mixed-color builds.

Getting the CLR-34125-FDE Mounted Right

These clamp onto a Picatinny rail, so mounting is straightforward. RPM calls for 18 in/lbs on the cap screws and 45 in/lbs on the cross bolt, so a good torque wrench is worth having on the bench. Level the rifle, level the scope against the built-in bubble, then torque the caps down and you're set. The high 1.25" set tips the scales right around 5.3 ounces.

Key Specifications

  • Manufacturer: Ruff's Precision Manufacturing (RPM)
  • MPN: CLR-34125-FDE
  • UPC: 850063702348
  • Ring Diameter: 34mm
  • Mounting Height: High, 1.25"
  • Color / Finish: Flat Dark Earth (FDE)
  • Ring Body & Cap Material: 6061-T6 Aluminum
  • Cross Bolt & Nut: 303 Stainless Steel (1/2")
  • Rail Compatibility: Picatinny
  • Built-In Level: Co-linear bubble level
  • Cap Screw Torque: 18 in/lbs
  • Cross Bolt Torque: 45 in/lbs
  • Weight: Approx. 5.3 oz
  • Quantity: Set of 2 rings
  • Country of Origin: Made in USA

What’s Included

  • 2 RPM CLR-34125-FDE 34mm high scope rings with integrated co-linear bubble level
  • Cap screws
  • Cross bolt and nut hardware

Frequently Asked Questions

What size scope tube do the CLR-34125-FDE rings fit?

These rings are made for 34mm main tube scopes, which covers a lot of the popular tactical and long-range optics out there. If your scope has a 30mm or 1-inch tube, you'll want a different set. Check your scope's tube diameter on the maker's spec sheet before ordering.

How does the co-linear bubble level work on these rings?

The level is built into the ring and positioned so you can see it from behind the scope using your non-dominant eye. That means you can confirm your rifle isn't canted right before the shot without lifting your head off the stock. During mounting it also gives you a single reference to level the rifle and scope together instead of clamping on separate bubble levels.

What's the mounting height on the RPM 34mm high rings?

These are the high version, placing the center of the scope tube 1.25 inches above the base. That extra height gives clearance for larger objective bells and bigger 34mm optics. If you run a lower-profile setup or want your cheek weld closer to the bore, RPM also makes low and medium versions.

What rail do the CLR-34125-FDE rings attach to, and what torque should I use?

They clamp onto a standard Picatinny rail. RPM recommends torquing the cap screws to 18 in/lbs and the cross bolt to 45 in/lbs. A quality torque wrench is the way to go here, since consistent, even pressure keeps your scope secure without over-tightening.

Additional information

UPC

850063702348

Manufacturer

Manufacturer Part Number

CLR-34125-FDE

Reviews

There are no reviews yet.

Be the first to review “RPM CLR-34125-FDE Precision 34mm High 1.25″ Scope Rings FDE”