Description
Rearden built the Argos to do one job perfectly: lock a 34mm optic to your rifle and keep it there, round after round, without adding a bunch of dead weight up top. This version runs a 34mm ring diameter at a 1.74" centerline height, which sits right in the sweet spot for AR-pattern rifles and other modern sporting platforms where you want a solid cheek weld and a clear look through the glass.
What Makes the Argos 34mm Mount Tick
The whole thing is fully machined from 7075-T651 aluminum plate, then finished in Type 3 hardcoat anodizing so it can shrug off years of range time, hunts, and the occasional bump against a truck door. Despite that toughness, the Argos is one of the lighter cantilever mounts you'll find. The 30mm 1.54" version tips the scale around 5.2 to 5.3 ounces, and this 34mm build stays in that same lightweight neighborhood without giving up any stiffness. That rigidity is what keeps your point of impact honest when the rifle starts working.
Fit, Rings, and Getting It Dialed In
The Argos clamps onto standard 1913 Picatinny rails and carries a 0 MOA cant, so what you zero is what you get with no built-in elevation bias. It's also compatible with Reptilia top rings if you want to swap or upgrade down the road. Rearden calls out a torque spec of 45 in-lbs for the rail clamp and 15 in-lbs on the rings with purple Loctite, which is worth following to the letter for consistent tracking and zero retention.
Why the 1.74" Height Works
That 1.74" number refers to the centerline height from the base to the middle of your scope tube. It's a popular choice for LPVOs and general-purpose scopes on flat-top rifles, giving most people a comfortable, heads-up shooting position. Real-world use backs up the design too, with the mount earning a reputation for holding zero through repeated firing and rough handling. If you're building out a precision rig or a do-everything carbine and want a mount that punches above its price without weighing you down, the Argos is an easy call.
Key Specifications
- Manufacturer: Rearden Manufacturing
- Model: Argos
- Manufacturer Part Number: 10220
- UPC: 850058579214
- Ring Diameter: 34mm
- Centerline Height: 1.74 in
- Cant: 0 MOA
- Material: 7075-T651 Aluminum
- Finish: Type 3 Hardcoat Anodized
- Color: Black
- Mount Type: Cantilever, one-piece
- Rail Compatibility: 1913 Picatinny
- Ring Compatibility: Reptilia top rings
- Rail Clamp Torque: 45 in-lbs
- Ring Torque: 15 in-lbs with purple Loctite
What’s Included
- Rearden Argos 34mm cantilever optic mount (1.74" height, black)
Frequently Asked Questions
What size scope tube does the Rearden Argos 34mm mount fit?
This model is built for optics with a 34mm main tube, which is common on many LPVOs and precision scopes. Make sure your scope's tube diameter is 34mm before ordering, since the rings won't accommodate a 30mm or 35mm tube. Rearden offers the Argos in 30mm and 35mm ring sizes too if you need a different fit.
How tall is the 1.74" height and who is it for?
The 1.74" measurement is the centerline height from the base of the mount to the center of your scope tube. It's a widely used height for flat-top AR-style rifles and modern sporting platforms, giving most people a comfortable, heads-up cheek weld. If you want a lower or taller setup, the Argos also comes in 1.54" and 1.94" options.
Will the Argos hold zero under recoil?
Yes. The one-piece 7075-T651 aluminum body is engineered for stiffness, and users report it holding zero reliably through repeated firing and rough handling. For best results, torque the rail clamp to 45 in-lbs and the rings to 15 in-lbs with purple Loctite.
Does the Argos mount have any built-in MOA cant?
No, this mount has a 0 MOA cant, meaning it sits level with no built-in elevation offset. That makes it a straightforward choice for general-purpose and close-to-mid-range shooting where you don't need extra elevation. If you're stretching a scope out to its long-range limits, you'd want a canted mount instead.




Reviews
There are no reviews yet.