0
0

Samson SAS/22 Takedown Folding Chassis for Ruger 10/22

UPC: 840478600407

$558.99

4 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're running a 10/22 Takedown and want more than just portability, the SAS/22 Takedown Chassis is a complete platform overhaul. This isn't a stock swap or an afterthought attachment. Samson engineered the entire system around the two-piece Takedown receiver, delivering a cohesive chassis that turns a practical rimfire into something genuinely configurable.

The real draw here is the compact factor combined with actual shooting features. Folded without a barrel, the chassis collapses to 11 inches. With a 16-inch barrel installed, the whole setup folds down to 24.5 inches versus 32.5 to 33.5 inches unfolded. That's meaningful space savings for a rifle that already packs down. The aluminum construction stays lightweight at 2.5 pounds, so you're not trading portability for capability.

Built-in adjustments for optics and positioning

The SAS-K folding stock comes with push-button adjustable length of pull between 12 and 13 inches and an independently adjustable cheek riser. This matters more than it sounds on a rimfire because optic height varies wildly depending on whether you're running a low-mount red dot, a scout rail optic, or a traditional scope. You can dial in your cheek weld without reshimming every time you swap glass.

Rails and mounting options

The 10.5-inch M-LOK handguard runs the full length of the barrel section with five mounting positions for lights, hand stops, and other accessories. Up front sits a 3.75-inch Picatinny scout rail that keeps optics well ahead of the receiver hinge, preserving your eye relief whether the rifle is folded or extended. The ambidextrous QD sling attachment points work from either side, and the whole thing accepts standard AR-pattern grips without modification.

Built for the Takedown platform

Everything is 6061-T6 aluminum with Type III hard anodizing in black, designed and manufactured in Keene, New Hampshire. The chassis is purpose-built for Ruger 10/22 Takedown receivers and is compatible with most 10/22 Takedown pattern clones.

Key Specifications

  • Manufacturer: Samson Manufacturing
  • Model: SAS-22 Takedown
  • Manufacturer Part Number: 04-06172-01
  • UPC: 840478600407
  • Fits: Ruger 10/22 Takedown and most 10/22 Takedown pattern clones
  • Material: 6061-T6 aluminum, Type III hard anodized
  • Color: Black
  • Weight: 2.5 pounds
  • Folded Length (without barrel): 11 inches
  • Folded Length (with 16" barrel): 24.5 inches
  • Unfolded Length: 29 to 30 inches (without barrel), 32.5 to 33.5 inches (with 16" barrel)
  • Length of Pull Adjustment: Push-button adjustable 12 to 13 inches
  • Cheek Riser: Push-button adjustable
  • Handguard: 10.5 inch M-LOK with 5 mounting positions
  • Picatinny Scout Rail: 3.75 inch 1913 Picatinny (9 slots)
  • Made in: Keene, New Hampshire, USA

What’s Included

  • Samson SAS/22 Takedown Chassis
  • 10.5 inch M-LOK handguard
  • 3.75 inch Picatinny scout rail
  • Magpul MOE-K pistol grip
  • Ambidextrous QD sling attachment points

Frequently Asked Questions

Will this chassis fit my standard Ruger 10/22 or is it Takedown only?

The SAS/22 Takedown is designed specifically for Ruger 10/22 Takedown receivers. Samson also makes a standard SAS/22 chassis for non-Takedown 10/22 rifles. Make sure you're ordering the correct version for your platform.

Can I adjust the length of pull and cheek riser while the rifle is folded?

The stock needs to be unfolded to make adjustments. Both the length of pull and cheek riser use push-button controls that are accessible when the stock is in the shooting position. This matters if you're swapping optics frequently, since rimfire optics vary more in mounting height than most centerfire setups.

What grips work with this chassis?

The SAS/22 Takedown accepts standard AR-pattern pistol grips without modification. It ships with a Magpul MOE-K grip, and works with most mil-spec grips that don't have a high beaver tail. Some grips with aggressive design may require minor fitting.

Is the entire chassis made of aluminum?

Yes, the chassis is constructed from 6061-T6 aluminum with Type III hard anodizing in black, which provides durability and corrosion resistance. The integrated folding stock mechanism uses aluminum and steel components, keeping the total weight to just 2.5 pounds.

Additional information

UPC

840478600407

Manufacturer

Manufacturer Part Number

04-06172-01

Color

Black

Model

Product Type

Chassis

Reviews

There are no reviews yet.

Be the first to review “Samson SAS/22 Takedown Folding Chassis for Ruger 10/22”