0
0

Borka Tools 65 In-Lbs Precision Torque Limiter Kit (PTL0065K1)

UPC: 709779913046

$46.99

15 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Getting torque right on a rifle isn't guesswork with one of these in hand. The Borka Tools 65 in-lb Precision Torque Limiter is preset at the factory to a fixed value, so instead of watching a dial and hoping you stopped in time, the tool simply disengages the moment you reach 65 inch-pounds. It's a set-it-and-forget-it approach that takes user error out of the equation, which is exactly what you want when you're snugging down scope mount crossbolts and don't want to strip threads or crack a mount.

What Makes the Borka PTL-65 Tick

The limiter itself is a compact unit measuring about 0.87 inches in diameter by 3 inches long and weighing roughly 3.5 ounces, so it disappears into a pouch or bench drawer. It's built on a proven industrial torque-limiting design and calibrated to the ISO-6789 procedure, with each unit either laser-etched with an ID or shipped alongside its own calibration certificate. Rather than a simple pass-through mechanism, Borka builds in an adjustment screw for precise factory calibration, which is a big part of why these hold their accuracy so well over time.

Setting Up the Borka 65 In-Lb Kit

The limiter runs a 3/8-inch square female drive on the input end and a 1/4-inch hex female output. It pairs with the included compact ratchet handle that carries a 3/8-inch square drive and a 1/4-inch hex end, and that handle is rated up to 250 inch-pounds so it won't be the weak link. One nice detail: the limiter caps torque in both directions but is precisely calibrated clockwise only, meaning you can use the same tool to back fasteners out without hurting the internals.

Borka has been a trusted name in precision firearm tools for years, founded by mechanical engineer Boris Teper and now part of the Pro-Shot Products family. If you shoot precision rifles, mount your own optics, or just like doing things once and doing them right, this is the kind of tool that earns a permanent spot in your kit.

Key Specifications

  • Manufacturer: Borka Tools
  • Model: Precision Torque Limiter (PTL-65)
  • MPN: PTL0065K1
  • UPC: 709779913046
  • Torque Value: 65 in-lbs (preset, not adjustable)
  • Limiter Dimensions: 0.87 in O.D. x 3 in length
  • Limiter Weight: 3.5 ounces
  • Drive (Limiter): 3/8 in square female input, 1/4 in hex female output
  • Ratchet Handle Length: 4.37 in
  • Ratchet Handle Rating: Up to 250 in-lbs
  • Calibration Standard: ISO-6789 procedure
  • Color: Silver
  • Product Type: Kit
  • Suggested Application: Various scope mount crossbolts

What’s Included

  • 65 in-lb Precision Torque Limiter (PTL)
  • Compact 3/8 in square drive PTL ratchet handle
  • 1/4 in hex shank screwdriver bit
  • PTL instructions
  • PTL calibration certificate of accuracy
  • Impact-resistant case with custom foam

Frequently Asked Questions

Is the Borka 65 in-lb torque limiter adjustable?

No, this PTL is preset at the factory to a fixed 65 inch-pound value and is not user adjustable. That's the whole point of a limiter design, it removes the chance of dialing in the wrong number. If you need a range of settings, Borka's adjustable torque driver covers 10 to 70 inch-pounds instead.

How accurate is the Borka Precision Torque Limiter?

Each limiter is calibrated to the ISO-6789 procedure and ships with either a laser-etched ID and separate calibration certificate or an ID/calibration label attached to the body. An internal adjustment screw allows Borka to fine-tune each unit during calibration, which helps it stay consistent over years of use. It's calibrated precisely in the clockwise direction.

Can I use the PTL-65 kit to loosen fasteners too?

Yes. By design the limiter caps torque in both clockwise and counterclockwise rotation, so backing screws out won't damage the internal mechanism. Just keep in mind the precise 65 in-lb calibration applies to tightening (clockwise) only.

What can I use this 65 in-lb kit for besides scope mounts?

While the suggested application is various scope mount crossbolts, a fixed 65 in-lb limiter is a popular choice for rifle action screws and other fasteners that call for that torque spec. Just confirm your manufacturer's recommended value matches 65 inch-pounds before you use it. One thing to avoid: never run a PTL on a powered or motorized driver, as that wears out the limiting mechanism.

Additional information

UPC

709779913046

Manufacturer

Manufacturer Part Number

PTL0065K1

Color

Silver

Model

Product Type

Kit

Reviews

There are no reviews yet.

Be the first to review “Borka Tools 65 In-Lbs Precision Torque Limiter Kit (PTL0065K1)”