0
0

Burn Proof Gear Heavy Suppressor Cover 7.5×1.6 Black for Alaskan360

UPC: 680660790840

$225.00

21 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Run a few magazines through your Alaskan360 and that can gets hot enough to scorch a sling, melt a pack strap, or leave a mark on your forearm you will remember for a while. This Heavy cover from Burn Proof Gear is built to put a serious thermal barrier between the suppressor and everything around it, and this version is sized specifically at 7.5 inches by 1.6 inches to match the Alaskan360 with the R.U.M. mount installed. No guessing on fitment, no bunched-up fabric, no exposed tube where you least want it.

Two Layers Doing Real Work

The construction here is a two-piece system. The outer shell is DuPont Kevlar in black, rated to 1000 degrees Fahrenheit, which works out to roughly 180 rounds of M855 fired through it. Underneath sits a fiberglass mesh sleeve that shrugs off temperatures up to 2000 degrees, so the layer closest to the hot tube is the one built to take the worst of it. Because the sleeve is a separate component, it can be replaced down the road while the outer cover keeps going. The whole thing cinches down at both ends for Burn Proof Gear's no-slip fit, so it stays planted through recoil and fast strings instead of creeping toward the muzzle like cheaper wraps tend to do.

Why Cover the Alaskan360 at All

Burn protection is the obvious answer, but it is not the only one. A hot suppressor throws mirage straight up through your optic, and on a precision gun that shimmer will wreck your ability to spot hits at distance. A cover knocks that down considerably. It also cuts the IR signature the can gives off under night vision, which matters more to some folks than others but is nice to have either way. These covers are made in the USA, have seen hard use in the field, and Burn Proof Gear backs them for life. For a can as versatile as the Alaskan360, one that might ride on a 5.56 carbine one weekend and a .338 hunting rig the next, this is the kind of accessory that earns its spot on the tube and stays there.

Key Specifications

  • Manufacturer: Burn Proof Gear
  • Manufacturer Part Number: BPG-SCC-H-7-1-6-FDE
  • UPC: 680660790840
  • Model: Suppressor Cover Heavy
  • Fits: Rugged Alaskan360 with mount installed
  • Cover Size: 7.5 in x 1.6 in
  • Color: Black
  • Outer Shell Material: DuPont Kevlar
  • Outer Shell Heat Rating: 1000 degrees F (approx. 180 rounds of M855)
  • Inner Liner Material: Fiberglass mesh sleeving
  • Inner Liner Heat Rating: 2000 degrees F
  • Design: Two-piece with replaceable inner sleeve, cinch-down no-slip fit
  • Country of Origin: USA
  • Warranty: Lifetime guarantee

What’s Included

  • Burn Proof Gear Heavy outer suppressor cover, 7.5 x 1.6, black
  • Inner fiberglass mesh heat-resistant sleeve

Frequently Asked Questions

Will this cover fit my Alaskan360 with the R.U.M. mount attached?

Yes, that is exactly what this size is for. The Alaskan360 measures 7.5 inches long by 1.6 inches in diameter with the Rugged Universal Mount installed, and this cover matches those dimensions. The cinch closures snug it down at both ends so it locks onto the can without slipping.

How hot can the Burn Proof Gear Heavy cover handle getting?

The black Kevlar outer shell is rated to 1000 degrees Fahrenheit sustained, which works out to roughly 180 rounds of M855 fired in succession. The fiberglass inner sleeve sitting against the tube is rated to 2000 degrees. If everything gets too hot to touch, let the setup cool before you keep running it hard.

Does a suppressor cover like this affect accuracy or point of impact?

The cover itself does not contact the bore or the mount, so it will not shift your zero. What it will do is help your accuracy at distance by cutting the heat mirage that boils up off a hot can and distorts your sight picture through a magnified optic. Plenty of precision guys run these for that reason alone.

Can I replace the inner sleeve if it wears out over time?

You can. Burn Proof Gear uses a two-piece design where the fiberglass inner sleeve is a separate component from the Kevlar outer cover. The sleeve takes the brunt of the direct heat, so being able to swap it keeps the cover in service for years. The covers are also made in the USA and backed by a lifetime guarantee.

Additional information

UPC

680660790840

Manufacturer

Manufacturer Part Number

BPG-SCC-H-7-5-1-6-BLK

Reviews

There are no reviews yet.

Be the first to review “Burn Proof Gear Heavy Suppressor Cover 7.5×1.6 Black for Alaskan360”

Related Products