0
0

Luth-AR Titanium Nitride Gold AR-15 Trigger Hammer Disconnector Kit

UPC: 812058032427

$46.99

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Luth-AR built this trigger kit for folks who want a noticeable step up from the stock AR-15 fire control group without jumping into a full aftermarket drop-in module. The trigger, hammer, and disconnector all wear a titanium nitride coating that gives them that gold finish you see on higher end parts, and it's not just for looks. The coating adds real hardness to the surfaces that see the most contact, which means less friction between the sear engagement points and a cleaner break every time you pull the trigger.

What the Gold TiN Finish Actually Does on This Trigger Kit

Titanium nitride coatings run considerably harder than bare mil-spec steel, and that translates to a slicker trigger pull with less creep and grit as the parts wear in. The low friction surface also helps the disconnector reset a little quicker between shots, which shooters tend to notice most during rapid strings of fire. On top of the smoother feel, the coating adds a layer of wear resistance that helps these three parts hold up over years of use instead of showing the same wear marks a bare steel trigger group picks up after a season or two at the range.

Mil-Spec Construction Behind the Luth-AR Trigger Hammer Disconnector Kit

Luth-AR does not use MIM (metal injection molded) parts anywhere in this kit. The trigger, hammer, and disconnector are all investment cast or machined to mil-spec drawings, using mil-spec materials and heat treat specifications, the same processes used on GI-spec fire control parts. That matters because MIM parts have a reputation for being brittle or inconsistent, while investment cast and properly heat treated steel holds tighter tolerances and stands up better to repeated cycling. Luth-AR has been producing AR-15 components in the USA since 2013, and this kit reflects that same mil-spec approach they use across their lower parts line.

Since this is a single stage trigger group and not a self-contained drop-in module, it's built to work with your existing mil-spec springs and pins already in your lower, or with a standard AR-15 lower parts kit. It's a good option if you're building from a stripped lower and want an upgraded trigger group from the start, or if you're just looking to refresh worn factory parts with something a little more durable and a lot more interesting to look at.

Key Specifications

  • Manufacturer: Luth-AR
  • Manufacturer Part Number: LRPK-THD-TiN
  • UPC: 812058032427
  • Finish: Titanium Nitride (TiN), Gold
  • Trigger Type: Single Stage
  • Components: Trigger, Hammer, Disconnector
  • Material: Mil-Spec steel, investment cast or machined, no MIM
  • Compatibility: Standard mil-spec AR-15 lower receivers
  • Hand Orientation: Ambidextrous
  • Country of Origin: United States
  • Springs/Pins Included: No, use existing lower parts kit springs and pins

What’s Included

  • TiN coated single stage trigger
  • TiN coated hammer
  • TiN coated disconnector

Frequently Asked Questions

Will the Luth-AR trigger hammer disconnector kit fit any AR-15 lower?

Yes, this kit is built to mil-spec dimensions, so it fits any standard mil-spec AR-15 lower receiver. It's designed as a direct replacement for a factory trigger group, not a specialty fit for a specific brand of lower.

Does this kit come with the springs and pins needed to install it?

No, this kit includes only the trigger, hammer, and disconnector. You'll need to reuse the springs and pins from your current lower parts kit or have a standard mil-spec set on hand.

What does the titanium nitride coating actually change about how the trigger feels?

The TiN coating adds hardness and reduces friction at the sear engagement surfaces, which usually results in a cleaner, less gritty trigger pull compared to bare steel mil-spec parts. It also holds up to wear better over time, so that smoother feel tends to stick around longer.

Is this a drop-in trigger or does it need gunsmithing to install?

This is a traditional three-piece trigger group, not a self-contained drop-in module, so it requires fitting pins and springs the same way a standard AR-15 trigger group does. Because of the tight tolerances involved, installation by an experienced gunsmith or someone comfortable with AR-15 fire control groups is recommended.

Additional information

UPC

812058032427

Manufacturer

Manufacturer Part Number

LRPK-THD-TiN

Color

Gold

Model

Product Type

Trigger

Reviews

There are no reviews yet.

Be the first to review “Luth-AR Titanium Nitride Gold AR-15 Trigger Hammer Disconnector Kit”