0
0

Burn Proof Gear Heavy Suppressor Cover 6×1.75 Black Southpaw Rhino S

UPC: 680660790482

$225.00

19 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

A hot can will bite you exactly once before you start shopping for a cover, and this one from Burn Proof Gear is the fix most folks land on. This is the Heavy version in 6" x 1.75", the size Burn Proof Gear specs for popular 1.75 inch diameter cans like the Q Southpaw and the Ridgeback Defense Rhino S. It wraps the suppressor in an outer layer of DuPont Kevlar rated to 1000 degrees Fahrenheit with an inner fiberglass mesh liner good to 2000 degrees, both aerospace grade and fire retardant. That layered build is what lets it soak up strings of fire without falling apart like the cheap covers do.

Why the Burn Proof Gear Heavy Cover Stays Put

Every Burn Proof Gear cover is cut a half inch longer than the suppressor body so the ends cinch down around the front and rear of the can. That is their no-slip fit, and it works. No rotating, no creeping forward under recoil, no bungee cords flapping around. Installed, it only adds roughly a quarter inch to the overall diameter, so it still clears most handguards and bags without a fight.

What a 6×1.75 Suppressor Cover Does for You at the Range

The practical wins are simple. It keeps you and your sling, pack, or truck seat from getting branded by a hot can, it knocks down the heat mirage that ruins your sight picture through a magnified optic after a few mags, and it reduces the IR signature of the suppressor. Figure a can gains around 7 degrees per round with 5.56, so after roughly 90 quick rounds it is smart to let things cool regardless of what is wrapped around it.

This cover is made in the USA and backed by Burn Proof Gear's lifetime guarantee. The black colorway keeps things low profile on duty rifles and home builds alike. If you run a Southpaw, a Rhino S, or another 1.75 inch can in this length range, this is the cover to match it with.

Key Specifications

  • Manufacturer: Burn Proof Gear
  • Manufacturer Part Number: BPG-SCC-H-6-1-75-BLK
  • UPC: 680660790482
  • Model: Suppressor Cover – Heavy
  • Cover Size: 6" x 1.75"
  • Fits Suppressor Diameter: 1.75 inches
  • Suppressor Fitment: Q Southpaw, Ridgeback Defense Rhino S, and similar 1.75" cans
  • Outer Material: DuPont Kevlar, rated to 1000°F
  • Inner Liner: Fiberglass mesh sleeving, rated to 2000°F
  • Added Diameter: Approximately 0.25 inches
  • Retention: Front and rear cinch, no-slip fit
  • Color: Black
  • Made In: USA
  • Warranty: Lifetime guarantee

What’s Included

  • Burn Proof Gear Heavy suppressor cover, 6" x 1.75", black, with front and rear cinch closure

Frequently Asked Questions

Which suppressors does the Burn Proof Gear 6×1.75 Heavy cover fit?

This size is spec'd by Burn Proof Gear's fit chart for 1.75 inch diameter cans in this length class, which is why you see it listed for the Q Southpaw and the Ridgeback Defense Rhino S. If you run a different 1.75 inch suppressor, check the manufacturer's size chart to confirm the length before ordering. Installed, it only adds about a quarter inch to the overall diameter.

How much heat can the Heavy suppressor cover handle?

The Kevlar outer shell is rated to 1000 degrees Fahrenheit and the fiberglass mesh liner inside is rated to 2000. As a rough guide, a can gains around 7 degrees per round of 5.56, so a cover like this handles normal range work and hard training just fine. For long strings of rapid fire, give everything a cooldown break around the 90 round mark.

Will this cover slip or rotate under recoil?

No, and that is one of the main reasons people go with Burn Proof Gear. The cover is built a half inch longer than the suppressor body so it cinches down around the front and rear of the can, locking it in place. There are no bungee cords or straps to shake loose during firing.

Does running a suppressor cover change my point of impact?

The weight added is only a few ounces, so any shift is minimal, but it is always smart to confirm zero after adding anything to the end of your barrel. The bigger difference you will notice is through your optic, since the cover knocks down heat mirage that distorts your sight picture once the can gets warm. It also cuts the IR signature and protects your gear from contact burns.

Additional information

UPC

680660790482

Manufacturer

Manufacturer Part Number

BPG-SCC-H-6-1-75-BLK

Reviews

There are no reviews yet.

Be the first to review “Burn Proof Gear Heavy Suppressor Cover 6×1.75 Black Southpaw Rhino S”