Description
Short 5.56 cans like the Polonium K heat up in a hurry. A few quick mags and that little 17-4 stainless can is hot enough to melt a sling, scorch a pant leg, or throw enough mirage to blur your optic. This heavy cover from Burn Proof Gear fixes all of that, and it does it with a fit that was cut for this exact suppressor instead of stretched over it as an afterthought.
Sized for the Polonium K, Not Kind Of Close
The cover measures 5.5 inches long by 1.6 inches in diameter, which matches the Polonium K plus a low-profile HUB mount like a Plan B, Hognut, Atlas, Zilch, or Xeno. That extra bit of length over the bare 4.8 inch can means the mount stays covered without any floppy excess hanging past the end cap. Burn Proof Gear builds every cover as a no-slip fit, so once you cinch it down it stays planted through recoil, barricade work, and bag rides. Installed, it adds roughly a quarter inch to the overall diameter, so it stays trim on a compact setup.
Heavy Kevlar Construction That Earns the Name
This is the heavy version, with a black Kevlar outer shell rated to 1000 degrees sustained and 1500 degrees max, paired with a high-temp FR inner sleeve that handles even more. That two-piece design puts an insulating barrier between the suppressor body and the outer fabric, which is what lets it hang in there through aggressive semi-auto strings where lighter covers start to cook. It also knocks down heat mirage for cleaner sight pictures and cuts IR signature under night vision, both real advantages once a short can gets rolling. Made in the USA.
A Worthwhile Add for Any Polonium K Setup
A quality cover is one of those accessories you stop thinking about the day you install it. Your support hand, your sling, and your range bag all stay protected, and the can itself stays easier to live with between strings. If a Polonium K rides on your rifle, this is the cover cut to match it.
Key Specifications
- Manufacturer: Burn Proof Gear
- Manufacturer Part Number: BPG-SCC-H-5-5-1-6-BLK
- UPC: 680660790369
- Fitment: Otter Creek Labs Polonium K 5.56
- Cover Length: 5.5 in
- Cover Diameter: 1.6 in
- Color: Black
- Outer Material: Heavy Kevlar fabric
- Outer Heat Rating: 1000 F sustained / 1500 F max
- Inner Liner: High-temp FR fiberglass sleeving
- Design: Two-piece, no-slip fit
- Added Diameter (Installed): Approx. 0.25 in
- Country of Origin: USA
What’s Included
- Burn Proof Gear heavy suppressor cover, black
- FR inner sleeving
Frequently Asked Questions
Will this Polonium K suppressor cover fit over my HUB mount?
Yes, that is the whole point of the 5.5 inch cut. The Polonium K itself runs about 4.8 inches without a mount, and the extra length is there to wrap low-profile HUB mounts like the Plan B, Hognut, Atlas, Zilch, and Xeno. Taller muzzle device mounts can change fitment, so measure your full setup before ordering.
How hot can this cover handle before it becomes a problem?
The heavy black Kevlar outer shell is rated to 1000 degrees sustained with a 1500 degree max, and the FR inner sleeve is rated even higher. As a reference point, a 5.56 suppressor climbs roughly 7 degrees per shot, so you have plenty of margin for hard semi-auto use. Just give it cooling breaks during extended high-volume sessions like you would any cover.
Does the Burn Proof Gear cover slide around under recoil?
No. These are built as a no-slip fit, so once the cover is installed and cinched down it stays put through recoil and rough handling. That dimension-specific cut is a big reason to pick this over a generic one-size cover that relies on straps alone.
How much bulk does the cover add to the suppressor?
Not much at all. Installed with the inner sleeving, it adds about a quarter inch to the overall diameter, which keeps a compact can like the Polonium K feeling compact. It still clears most handguard setups where the bare suppressor already fit with room to spare.




Reviews
There are no reviews yet.