0
0

Burn Proof Gear Heavy Suppressor Cover FDE for HUXWRX FLOW 556K/6K

UPC: 680660790314

$225.00

27 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Anyone who has bumped a bare suppressor after a couple magazines knows how fast that lesson sticks. Burn Proof Gear built this heavy suppressor cover specifically for the HUXWRX FLOW 556K and 6K, cut to 4.5 inches long with a 1.6 inch diameter so it hugs the can properly while leaving the vented front end exposed. That matters on a FLOW series suppressor, since the flow-through design needs that end cap clear to vent gas forward the way it was engineered to. Cover the whole thing with a generic wrap and you are fighting the suppressor instead of working with it.

What Makes the Burn Proof Gear Heavy Cover Different

This is a two-piece setup. The outer shell is a Kevlar diamond weave ripstop in Flat Dark Earth, and underneath sits a fiberglass mesh sleeve rated to a blistering 2000 degrees Fahrenheit. Together they take the sting out of a hot can so you can transition, sling up, or move through a drill without cooking your support hand or melting a sling. It also knocks down mirage over the barrel, which your optic will thank you for on longer strings. Installed, the cover adds roughly a quarter inch to the diameter of the can, so it stays trim on a compact 5.56 setup instead of turning your K can into a fence post.

A No Slip Fit for Your FLOW 556K or 6K

Burn Proof Gear cuts these covers for a snug, no slip fit, so it stays planted through recoil and heat cycles instead of walking forward like loose wraps tend to do. The materials are heat-rated and sourced from trusted U.S. suppliers, and the build quality shows once you get it mounted. If you run a FLOW 556K or 6K hard, this is the kind of accessory you buy once and stop thinking about. Give the can time to cool between heavy strings, keep the vented end clear, and this cover will soak up abuse for years.

Key Specifications

  • Manufacturer: Burn Proof Gear
  • Manufacturer Part Number: BPG-SCC-H-4-5-1-6-FDE
  • UPC: 680660790314
  • Fits: HUXWRX FLOW 556K and FLOW 6K
  • Cover Length: 4.5 in
  • Cover Diameter: 1.6 in
  • Color: Flat Dark Earth (FDE)
  • Outer Material: Kevlar diamond weave ripstop
  • Inner Liner: Fiberglass mesh sleeve, rated to 2000°F
  • Construction: Two-piece cover and inner sleeve, no slip fit
  • Added Diameter Installed: Approx. 0.25 in over bare suppressor
  • Series: Heavy Suppressor Cover

What’s Included

  • Burn Proof Gear heavy suppressor cover, FDE
  • Inner fiberglass heat sleeve

Frequently Asked Questions

Will this Burn Proof Gear cover block the vented end cap on my FLOW 556K?

No, and that is the whole point of this specific cut. At 4.5 inches, the cover ends short of the vented front end so the FLOW series flow-through design can push gas forward the way HUXWRX intended. You get heat protection on the body of the can without choking off the end cap.

How hot can the Burn Proof Gear heavy suppressor cover get before it becomes a problem?

The inner fiberglass mesh sleeve is rated to 2000 degrees Fahrenheit, and the Kevlar diamond weave outer shell is built for serious sustained fire. That said, no cover makes a suppressor immune to heat. If the outside is too hot to touch, give the can a few minutes to cool before your next string.

Does the cover slip or rotate on the suppressor during firing?

Burn Proof Gear designs these as a no slip fit, so once it is seated on the 1.6 inch body of the FLOW 556K or 6K it stays put through recoil and heat cycles. It is a snug install by design, which is what keeps it from walking forward like cheaper universal wraps.

Will this cover fit suppressors other than the HUXWRX FLOW 556K and 6K?

It can work on other cans that measure right around 1.6 inches in diameter, as long as the 4.5 inch length makes sense for that suppressor. A good rule of thumb is a cover within about half an inch of the can's length. Check Burn Proof Gear's size chart if you are trying to match it to a different suppressor.

Additional information

UPC

680660790314

Manufacturer

Manufacturer Part Number

BPG-SCC-H-4-5-1-6-FDE

Reviews

There are no reviews yet.

Be the first to review “Burn Proof Gear Heavy Suppressor Cover FDE for HUXWRX FLOW 556K/6K”