Description
The factory trigger on a Ruger 10/22 does its job, but anyone who has spent time behind one knows it is far from crisp. There is slack to take up, a little grit on the way back, and a break that is never quite where you expect it. Timney built the 10221CCOMP to fix all of that in one shot with a complete, self-contained trigger group that drops right into your existing stock.
What Makes the 10221CCOMP Different
This is not a tune-up kit or a spring swap. The housing is CNC machined from 6061-T6 billet aluminum, while the trigger, hammer, and sear are wire EDM cut from heat-treated steel for a pull that stays consistent shot after shot. Timney sets it at a factory-calibrated 2.75 pounds with zero creep, so every trigger that leaves their shop breaks the same way, right out of the box.
Installing the Timney 10221CCOMP
There is no fitting, filing, or gunsmith visit involved here. Push out the two factory action pins, pull the stock trigger group, and drop this one in its place. Along with the trigger itself you get Timney's extended magazine release, which lets you drop a mag with one finger instead of fumbling around the trigger guard, plus an automatic bolt release built into the housing.
Fit and Backing on This Compact Drop-In Trigger
The compact housing profile on this version is sized to work across the wider 10/22 family, including the Compact, Carbine, Sporter, Tactical, Takedown, and Target variants, so it is a safe bet no matter which flavor of 10/22 you are running. Everything is hand assembled and tested in Timney's Arizona shop, and like the rest of their lineup it carries their lifetime warranty. For the money most people spend on ammo in a single range trip, this is a straightforward way to make your 10/22 feel like a much more serious rifle.
Key Specifications
- Manufacturer: Timney Triggers
- Manufacturer Part Number: 10221CCOMP
- UPC: 081950212866
- Trigger Type: Single-stage, curved shoe
- Pull Weight: 2.75 lbs, factory-set, non-adjustable
- Housing Material: CNC-machined 6061-T6 billet aluminum
- Trigger/Hammer/Sear Material: Wire EDM-cut, heat-treated steel
- Finish: Black housing / black trigger shoe
- Magazine Release: Timney-designed extended magazine release
- Bolt Release: Automatic bolt release included
- Installation: Drop-in, two-pin fitment, no gunsmithing required
- Fitment: Ruger 10/22 platform including Compact, Carbine, Sporter, Tactical, Takedown, and Target
- Country of Origin: Made in USA
- Warranty: Lifetime warranty from Timney
What’s Included
- Complete Timney 10221CCOMP trigger assembly (housing, trigger, hammer, sear)
- Integrated trigger guard
- Timney extended magazine release
- Automatic bolt release
- Installation instructions
Frequently Asked Questions
Will the Timney 10221CCOMP fit my specific Ruger 10/22 model?
Yes, this trigger group is built to fit across the Ruger 10/22 lineup, including the Compact, Carbine, Sporter, Tactical, Takedown, and Target versions. It uses the same two factory action pins as the stock trigger group, so fitment issues are rare across the platform.
Can I adjust the pull weight on this trigger?
No, the 10221CCOMP is factory-set at 2.75 pounds and is not adjustable. Timney calibrates and tests each unit by hand before it leaves the shop, so you get a consistent, no-creep break without needing to tune anything yourself.
Do I need a gunsmith to install the Timney 10221CCOMP?
Not at all. Installation is a true drop-in job, you just push out the two factory pins holding your current trigger group, remove it, slide this one in, and reinsert the pins. Most people have it done in well under fifteen minutes with basic hand tools.
What is the difference between this and Timney's other black 10/22 triggers?
The 10221CCOMP shares the same 2.75 lb single-stage pull, materials, and extended magazine release as Timney's standard 10221C, but its housing profile is sized for the Compact and other shorter 10/22 variants. The color options and internal parts are otherwise the same across that line.




Reviews
There are no reviews yet.