0
0

Lee Precision 7.62x54R Micrometer Bullet Seating Die (92235)

UPC: 734307922351

$27.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're loading for an old Mosin-Nagant, a PSL, or any other 7.62x54R rifle, this Lee Precision micrometer bullet seating die takes the frustration out of getting your seating depth right. Instead of nudging a lock nut and hoping you land in the right spot, you dial the laser-engraved micrometer thimble to your number and go. The divisions read in thousandths of an inch, just like a depth micrometer, so once you find a load that groups well, you write that number down and come right back to it next session.

What Makes the 7.62x54R Micrometer Seating Die Tick

This is a dead length seating die, which means the body contacts the shell holder to give you consistent, uniform seating depth every pull of the handle. A floating bullet guide holds the case mouth and bullet in alignment while they travel into the die, and that radial clearance lets everything self-center against the seater screw. The payoff is measurably less bullet runout, which is the kind of concentricity that shows up on paper downrange.

Smooth Adjustment and a Mark-Free Finish

The adjustment is clickless and smooth, so you can sneak up on a depth without overshooting. The seating stem is machined and burnished to handle nearly any bullet nose shape without scratching or marring the tip, whether you're running surplus-style spitzers or match bullets. The whole body is one piece and laser engraved, so it stays easy to read even after years on the bench.

Seat and Crimp When You Need To

The floating bullet guide on this die is reversible. Unthread it, flip it, and reinstall it, and you can seat and crimp in a single operation. That versatility is handy for 7.62x54R loads headed into a rifle where you want a little extra bullet hold. Lee backs this die with their lifetime guarantee, and it threads into any standard single-stage or progressive press.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 92235
  • UPC: 734307922351
  • Cartridge: 7.62x54R
  • Die Style: Micrometer Bullet Seating Die
  • Seating Type: Dead Length
  • Micrometer Divisions: .001 inch per graduation
  • Adjustment: Clickless, infinitely adjustable
  • Bullet Guide: Floating, reversible for seat-and-crimp
  • Body: One-piece, laser engraved
  • Thread: 7/8-14 standard press thread
  • Country of Origin: United States
  • Warranty: Lee Lifetime Guarantee

What’s Included

  • 7.62x54R Precision Micrometer Bullet Seating Die
  • Ultimate Lock Ring
  • Instructions

Frequently Asked Questions

Is the 7.62x54R micrometer die a complete die set?

No, this is a single bullet seating die, not a full set. You'll still need a sizing die to resize your brass. Many reloaders pair it with a Lee full-length sizing die for 7.62x54R to cover the whole process.

Can this die seat and crimp at the same time?

Yes. The floating bullet guide is reversible, so you can unthread it, flip it around, and reinstall it to seat and apply a crimp in one operation. Keep in mind that seating while crimping works best with brass trimmed to uniform length and bullets that have a crimp groove.

What does the micrometer adjustment actually do for me?

The laser-engraved thimble reads in thousandths of an inch, just like a depth micrometer, so you can dial in an exact seating depth. Once you find a load that shoots well, you note the number and return to that same setting next time without re-measuring. That repeatability is the big draw over a standard lock-nut seating die.

Will it work with any bullet shape for 7.62x54R?

The seating stem is machined and burnished to seat nearly any point style bullet without marking or damaging the tip. That covers typical spitzer and round nose profiles common to the 7.62x54R. For specialty flat nose or wadcutter bullets you'd want a dedicated seating screw, though that's rarely a concern with this cartridge.

Additional information

UPC

734307922351

Manufacturer

Manufacturer Part Number

92235

Reviews

There are no reviews yet.

Be the first to review “Lee Precision 7.62x54R Micrometer Bullet Seating Die (92235)”