Description
There is nothing else on the rack that runs like a Vector. KRISS built this platform around the Super V Recoil Mitigation System, a delayed blowback design that sends bolt energy downward behind the magazine well instead of straight back into your shoulder. Pair that with a bore axis that sits below the trigger and you get a 10mm that stays remarkably flat through fast strings. That matters in this caliber. Full-power 10mm has real thump in most guns, but the Vector turns it into something you can genuinely drive hard on multiple targets.
What the Gen 3 Vector SBR Changes
The third generation is the biggest update this platform has seen. The upper housing is slimmer and lighter than the Gen 2, the handguard swaps Picatinny for M-LOK, and the magazine release is now ambidextrous. KRISS also opened up the grip interface, so the Gen 3 accepts aftermarket pistol grips if the factory one is not your speed. The reshaped lower gives your support hand better purchase, and the 3-position folding stock collapses the whole package down for storage or lets you dial in length of pull. Low-profile flip-up sights come installed, with a full top rail waiting for your optic.
Feeding the 10mm Vector
Magazines are the easy part. This rifle runs Glock 20 pattern mags, and the included 33-round MagEx2 extended magazine gives you plenty of trigger time between reloads. If you already own a 10mm Glock, your mag pouch just got more useful. The 5.5 inch barrel is threaded 9/16×24, so adding a muzzle device or can is straightforward.
Why the Alpine White Vector Stands Out
The Alpine White finish is a clean, sharp look you do not see every day, and it photographs even better in person. Between the caliber, the recoil system, and the styling, this is one of those firearms people walk across the shop to ask about. It earns the attention every time it hits the range.
Key Specifications
- Manufacturer: KRISS USA
- Model: Vector SBR Gen 3
- Manufacturer Part Number: KV10-3SAP00
- UPC: 810172121669
- Caliber: 10mm Auto
- Action: Semi-Auto
- Operating System: Closed Bolt, Delayed Blowback (Super V Recoil Mitigation)
- Barrel Length: 5.5"
- Muzzle Thread: 9/16×24
- Capacity: 33 Rounds
- Magazine Compatibility: Glock 20 Pattern
- Stock: 3-Position Adjustable Folding Stock
- Sights: Low-Profile Flip-Up Front/Rear
- Handguard: M-LOK
- Overall Length (Collapsed): 24.25"
- Finish: Alpine White
What’s Included
- KRISS Vector SBR Gen 3 10mm rifle
- One 33-round MagEx2 extended Glock pattern magazine
- Low-profile flip-up front and rear sights (installed)
- Owner's manual
Frequently Asked Questions
What magazines does the KRISS Vector SBR Gen 3 10mm use?
It runs Glock 20 pattern 10mm magazines, which are affordable and easy to find. The rifle ships with one 33-round MagEx2 extended magazine from KRISS. If you already shoot a Glock 20 or 40, your existing mags will feed this rifle.
How does the Super V system handle full-power 10mm recoil?
Instead of sending bolt energy straight back like a traditional blowback gun, the Super V system redirects it downward into a recess behind the magazine well. Combined with a bore axis that sits below the trigger, muzzle rise is dramatically reduced. Even hot 10mm loads stay flat enough for quick follow-up shots.
Can I put a suppressor on the Vector SBR Gen 3?
Yes, the 5.5 inch barrel comes threaded 9/16×24 from the factory. Just confirm your suppressor is rated for 10mm Auto before running it, since 10mm generates more pressure than .40 S&W. Many .45 caliber cans handle it well, but check with your suppressor manufacturer first.
What is different about the Gen 3 Vector compared to Gen 2?
The Gen 3 gets a slimmer, lighter upper housing, an M-LOK handguard in place of the old Picatinny rail, and an ambidextrous magazine release. It also accepts aftermarket pistol grips, which earlier generations did not. The reworked lower housing gives your support hand a more comfortable spot to index as well.






Reviews
There are no reviews yet.