$59.95
133 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Sometimes the best mounting solution is the simplest one. The Breek Arms BRK4600 is a direct thread adapter that screws into the industry standard 1.375×24 HUB threads on your suppressor and lets you spin it straight onto a 1/2×28 threaded barrel. No proprietary muzzle devices, no locking collars, just a clean thread-on connection that stays put and returns to the same spot every time you mount up.
The big selling point here is how little this mount adds to your setup. With its slim 0.70 by 1.49 inch profile, it tacks on roughly a quarter inch to your overall suppressor length, so your rifle keeps the compact, balanced feel you built it for. Breek machines these to near-zero runout, which matters more than most people realize. A concentric mount means your bore alignment stays true, your point of impact stays predictable, and you are not chasing shifting zeroes every time you reinstall the can.
This version is cut from 17-4 stainless steel heat treated to the H900 condition, then given a Nitride finish for serious surface hardness and corrosion resistance. That combination handles heat, carbon fouling, and rough weather without complaint, making it a solid pick for high round count range days and hard field use. If you have ever fought a scorched, stubborn mount at the end of a long session, you will appreciate how well Nitride treated stainless cleans up.
Installation is straightforward: thread the hub into your HUB compatible suppressor using a 1-1/4 inch wrench, then spin the whole assembly onto your 1/2×28 barrel. The 1/2×28 pitch makes this a natural fit for 5.56 rifles and most rimfire and 9mm hosts with threaded barrels. Since the HUB pattern is shared across a huge range of suppressor brands, one mount can move between multiple cans in your collection without any adapter juggling.
It threads into any suppressor built on the industry standard 1.375×24 HUB pattern, which covers a huge portion of modern centerfire cans from many different manufacturers. If your suppressor accepts HUB mounts, this adapter converts it to a direct thread setup for 1/2×28 barrels. Check your suppressor's rear mount threading before ordering to confirm it uses the 1.375×24 standard.
Only about a quarter inch of overall length gets added to your suppressor. The hub itself measures a slim 0.70 by 1.49 inches, so most of its body sits within the mounting area rather than hanging out past the can. It is one of the more compact ways to run a HUB suppressor on a direct thread host.
For a dedicated host, direct thread is hard to beat. There are fewer moving parts, the connection is extremely stable under recoil, and Breek machines this hub to near-zero runout for consistent alignment and minimal point of impact shift. QD systems shine when you swap cans between rifles constantly, but for a set-it-and-shoot-it setup, direct thread keeps things simple and repeatable.
A 1-1/4 inch wrench handles the install. Thread the hub into your suppressor's 1.375×24 HUB threads, snug it down, and then the whole assembly spins onto your 1/2×28 barrel by hand. Many folks add a small amount of anti-seize on the threads to make removal easier after hot range sessions.
| UPC | 812296032111 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | BRK4600 |
| Color | Black |
| Model |
You must be logged in to post a review.
Reviews
There are no reviews yet.