$9.99
7 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Cleaning a compact Glock on a bare table is a good way to lose a spring or scuff your slide. This TekMat gives you a dedicated 11 by 17 inch surface sized for the Glock 42 and 43, so you can strip the pistol down completely and still have room for your rod, brushes, patches, and solvent without parts wandering off the edge.
The top is a soft polyester fiber surface that stays lint-free, meaning no stray fibers finding their way into your striker channel or trigger group. It shrugs off oil, solvent, and water, so spills wipe up instead of soaking through to your bench. When you're done, it rolls up and tucks away with the rest of your cleaning gear, and if it gets grimy after enough sessions you can toss it in the wash and let it air dry.
Underneath sits a full 1/8 inch of vulcanized rubber backing. That thickness does two jobs: it grips the table so the mat won't slide around while you're wrestling with a recoil spring, and it gives dropped pins and slides a little cushion instead of a hard landing. The dye-sublimation printing is heat-bonded into the fabric, so the artwork won't scratch off or fade no matter how many cleanings it sees.
What makes this one genuinely useful is the full-color parts diagram printed right on the surface. It lays out an exploded schematic of the Glock 42 and 43 alongside a bit of history on the platform, so when you're swapping a part or figuring out where a detent goes, the reference is right in front of you. New owners lean on it to learn the gun, and folks who've done a hundred field strips still appreciate having the layout handy for detail cleaning.
Yes, this mat is printed specifically for both the Glock 42 and Glock 43 and includes a parts diagram covering the platform. The 11 by 17 inch surface easily handles either pistol fully disassembled with room left over for tools. It's a great fit if you own one or both of these slim single-stack Glocks.
The top is a soft polyester fiber that's lint-free, so it won't scratch your slide or leave stray fibers in the action. The mat is also oil, solvent, and water-resistant, which keeps cleaning chemicals from soaking through to your bench. Between the soft top and the cushioned backing, both your gun and your work surface stay protected.
Absolutely. Once it picks up enough oil, solvent, or grime, you can toss it in the washing machine on a gentle cycle and let it air dry. The dye-sublimation printing is heat-bonded into the fabric, so washing won't cause the diagram to fade or peel.
It does. The 1/8 inch vulcanized rubber backing grips your table so the mat won't slide around while you're pushing pins or fighting a recoil spring. That same thickness also adds a bit of cushion under dropped parts.
| UPC | 612409970770 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | TEKR17GLOCK4243 |
| Length | 17" |
| Model | |
| Product Type | Mat |
| Shipping Weight | 0.57 |
You must be logged in to post a review.
Reviews
There are no reviews yet.