Description
The RCBS 23701 is a two-die full-length set built for handloaders running the 25 Creedmoor. It falls under the brand's Group A lineup, which covers the popular rifle cartridges you see most on the bench. The set uses the standard 7/8"-14 thread, so it drops right into just about any single-stage or progressive press you already own.
What the RCBS 23701 Die Set Does on the Bench
This set is made for bottleneck cases and includes a Full-Length Sizer Die with an expander-decapping unit plus a Seater Die with a bullet seater plug. The sizer brings your brass back to SAAMI minimum dimensions, resizing the outside of the case, knocking out the spent primer, and expanding the neck to take the next bullet in one pull of the handle. The die body is vented to keep trapped air and excess lube from denting your cases, which keeps your brass looking clean through repeated loadings.
Build Quality Behind the 25 Creedmoor Die Set
RCBS machines these dies from their proprietary die steel to exacting tolerances, then finishes the interior smooth so sizing is easy on your brass and extraction stays snug without scratching. Headspace is held tight to keep from stretching the case body during sizing, and the whole thing is made in the USA. One thing worth knowing: these dies are fully serviceable, so decapping pins, expander balls, lock rings, and seating stems can all be swapped or replaced down the road.
Since the 25 Creedmoor is a necked-down 6.5 Creedmoor case, it's a flat-shooting, mild-recoiling round that rewards careful handloading. This set gives you the two tools you need to turn once-fired brass into match-worthy ammo. Keep in mind the shell holder is sold separately, so grab a #3 holder to complete your setup if you don't already have one on hand.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 23701
- UPC: 850070830010
- Caliber: 25 Creedmoor
- Die Series: Group A – Popular Rifle Cartridges
- Product Type: Full Length
- Number of Dies: 2
- Thread: 7/8"-14
- Carbide: No
- Shell Holder: #3 (sold separately)
- Dimensions: 1.70 x 4.50 x 5.95 in
- Country of Origin: Made in USA
What’s Included
- Full-Length Sizer Die with Expander-Decapping Unit
- Seater Die with Bullet Seater Plug
- Green RCBS die box
- Instruction sheet
Frequently Asked Questions
Does the RCBS 23701 die set come with a shell holder?
No, the shell holder is not included with this set. The 25 Creedmoor uses the RCBS #3 shell holder, so you'll want to pick one up separately if it's not already in your kit. It's a common holder that fits a number of other cartridges too.
What dies are included in the 25 Creedmoor Full Length Die Set?
You get two dies: a Full-Length Sizer Die with an expander-decapping unit, and a Seater Die with a bullet seater plug. The sizer resizes the case, removes the spent primer, and expands the neck in one step. The seater then sets your bullet to the depth you want.
Will the RCBS 23701 dies fit my reloading press?
Yes, these dies use the standard 7/8"-14 thread found on the vast majority of single-stage and progressive presses. If your press takes common American rifle dies, this set threads right in with no adapter needed.
Are the parts on this RCBS die set replaceable if something wears or breaks?
They are. RCBS dies are fully serviceable, so decapping pins, expander balls, lock rings, and seating stems can all be replaced. That serviceability is a big reason these dies have a long reputation for lasting through years of loading.




Reviews
There are no reviews yet.