Description
The Mossberg X-Factor 95231 is a dedicated turkey choke built to squeeze every bit of pattern density out of your 20-gauge pump. This is an extended, ported tube with an extra full constriction, meaning it clamps that shot column down tight for the kind of dense, even pattern you want when you're aiming for a small target like a gobbler's head and neck. The extra length and polished bore give the shot column a longer runway to settle before it leaves the muzzle, which is a big part of why these turkey tubes throw such consistent patterns compared to a shorter flush choke.
What the X-Factor Ports Actually Do
Running down each side of the tube are two rows of angled ports. As the wad and gases move through, those ports bleed off pressure and help the wad separate cleanly from the shot before it hits open air. Cleaner wad separation usually translates to fewer flyers and a tighter core, which is exactly what you're chasing at 30, 40, and yes, even out past 45 yards with the right load. Plenty of turkey hunters run ported tubes hoping for reduced muzzle jump too, and while the felt difference varies gun to gun, the patterning benefit is the real reason this choke earns its keep.
Fitting the X-Factor to Your Mossberg
This one uses the Accu-Choke thread pattern and drops right into 20-gauge Mossberg 500, 505, 510 Mini, and Maverick 88 threaded barrels. That same thread also plays nice with Smith & Wesson, Savage, and Winchester Win-Choke style barrels, so it's more versatile than it looks. It's machined from steel with a black finish, so it holds up to steel and lead loads and shrugs off the abuse of a season in the woods.
One thing worth stressing with any turkey choke: pattern your gun before you hunt. Constriction and ammo work together, so put a few different loads on paper at your max range and let the target tell you which combo your barrel likes best. Get that dialed in and this X-Factor will do its job come opening morning.
Key Specifications
- Manufacturer: Mossberg
- Manufacturer Part Number: 95231
- UPC: 015813952316
- Gauge: 20 Gauge
- Constriction: Extra Full (Turkey)
- Design: Extended, Ported
- Thread Pattern: Accu-Choke
- Material: Steel
- Finish: Black
- Length: 7.35 in
- Chokes Included: One Choke Tube
- Compatible Models: Mossberg 500, 505, 510 Mini, Maverick 88
What’s Included
- One Mossberg X-Factor 95231 extended ported turkey choke tube
Frequently Asked Questions
Which shotguns does the Mossberg X-Factor 95231 choke fit?
It's cut with the Accu-Choke thread pattern and fits 20-gauge Mossberg 500, 505, 510 Mini, and Maverick 88 threaded barrels. The same thread also works in Smith & Wesson, Savage, and Winchester Win-Choke style barrels. Always double-check your barrel is threaded for interchangeable chokes before ordering.
Can I shoot TSS or lead turkey loads through the X-Factor tube?
This is a steel choke with an extra full constriction, so it handles standard lead and steel turkey loads well. Many 20-gauge hunters pair a tight turkey tube like this with premium loads such as Longbeard XR or TSS for serious reach. Since results vary by gun, pattern a few different loads to find the one your barrel shoots tightest.
What's the point of the ports on the X-Factor choke?
The two rows of angled ports bleed off gas and help the wad separate cleanly from the shot column, which tends to tighten the core of your pattern. Some hunters also feel the ports take a little edge off muzzle jump, though that varies from gun to gun. The main payoff is the denser, more consistent turkey pattern.
How far can I reliably shoot turkeys with this extra full choke?
With a good turkey load, an extra full ported tube like the X-Factor is built to hold a killing pattern out past 45 yards. The real answer depends on your specific gun and ammo, so pattern at your max range and only take shots where you're putting enough pellets in a 10-inch circle. Dialing in that combo on paper is the best way to know your true effective distance.





Reviews
There are no reviews yet.