0
0

YHM Victra-20 Benelli Crio Plus Mount Assembly YHM-1354A

UPC: 841812103264

$89.00

10 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Running a Victra-20 on a Benelli 20 gauge with Crio Plus choke threads? This is the mount that makes it happen. Yankee Hill Machine builds a dedicated mount for each major choke thread pattern, and the YHM-1354A is the one cut specifically for the Benelli Crio Plus system. It spins into your barrel right where your choke tube normally lives, giving the Victra-20 a rock-solid attachment point without any gimmicks or barrel modifications.

How the Victra-20 Crio Plus Mount Works

Here's the part that trips people up at the counter: this mount does not choke your shot. YHM split those jobs on purpose. The mount handles attachment only, while the choke cone sits up front in the end cap of the Victra-20 suppressor itself. That means you can swap choke cones for different constrictions without ever pulling the mount off your barrel. Once the suppressor is threaded on, the included V-20 jam nut snugs everything down and keeps the offset can indexed exactly where you want it.

Built Like the Rest of the YHM Lineup

YHM machines these mounts from 17-4 stainless steel and treats them with a Melonite finish, so powder residue and weather are not going to be a problem. The mount only adds about 0.950 inches to your barrel length, which keeps the whole setup compact and does not throw off the balance of your gun. It is a small part, but it is the one doing all the work holding a suppressor to a shotgun, so the tough steel construction matters.

Setting Up Your Crio Plus Mount Assembly

Installation is about as simple as swapping a choke tube. Pull your existing choke, thread the mount in, attach the Victra-20, and lock it down with the jam nut. If you own multiple shotguns with different choke thread patterns, picking up a mount for each host is a handy way to move one can across your whole safe. Made in the USA, like everything else that comes out of the YHM shop.

Key Specifications

  • Manufacturer: Yankee Hill Machine
  • Manufacturer Part Number: YHM-1354A
  • UPC: 841812103264
  • Compatibility: YHM Victra-20 suppressor
  • Choke Thread Pattern: Benelli Crio Plus
  • Gauge: 20 Gauge
  • Material: 17-4 Stainless Steel
  • Finish: Melonite
  • Length Added to Barrel: Approx. 0.950 in
  • Choke Function: None (choke cone mounts in suppressor end cap)
  • Shipping Weight: 0.176 lb
  • Country of Origin: USA

What’s Included

  • Victra-20 Crio Plus mount assembly
  • YHM V-20 jam nut (YHM-1250)

Frequently Asked Questions

Does the Victra-20 Crio Plus mount change my shot pattern?

No, and that is by design. The mount only attaches the Victra-20 suppressor to your barrel using the Crio Plus choke threads. The choking is handled by a separate choke cone that installs in the front cap of the suppressor, and YHM offers Improved Cylinder, Modified, and Full options for the Victra-20.

Which shotguns does the YHM-1354A mount fit?

This mount is cut for the Benelli Crio Plus choke thread pattern, so it fits 20 gauge Benelli shotguns using that system. YHM makes a separate mount for each major choke pattern, including Beretta Optima HP, Beretta/Benelli Mobil, Browning Invector, Invector Plus, and Remington, so double check which threads your barrel uses before ordering.

Can I use this mount with the Victra-12 suppressor?

This is the 20 gauge version, built for the Victra-20 suppressor. YHM makes a similar Crio Plus mount for the 12 gauge Victra-12 under a different part number. Match the mount to the suppressor you own to make sure everything threads up correctly.

How does the Victra-20 mount install on my barrel?

It goes in just like a choke tube. Remove your factory choke, thread the mount into the barrel, then attach the Victra-20 suppressor and tighten the included jam nut to lock the can in position. The jam nut is important because it keeps the offset suppressor properly indexed while you shoot.

Additional information

UPC

841812103264

Manufacturer

Manufacturer Part Number

YHM-1354A

Shipping Weight

0.176

Reviews

There are no reviews yet.

Be the first to review “YHM Victra-20 Benelli Crio Plus Mount Assembly YHM-1354A”