0
0

YHM HUB Direct Thread Mount M24x1 RH, 1.375-24 Suppressor Adapter

UPC: 841812102793

$74.75

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Sometimes you just want to skip the muzzle device and spin your can straight onto the barrel. That's exactly what this Yankee Hill Machine HUB Direct Thread Mount is for. It threads into the industry standard 1.375-24 HUB interface on the back of your suppressor and gives you M24x1 right hand barrel threads on the other end, turning a QD setup into a simple, low profile direct thread configuration. No extra muzzle devices to buy for every rifle, no added hardware hanging off your barrel when the can comes off.

Built Like the Rest of the YHM Lineup

YHM machines this mount from 17-4 PH stainless steel that's been heat treated for strength, then coats it in black oxide so it blends right in with your suppressor body. The through bore measures .45 caliber, which keeps it compatible with a wide range of rifle and pistol calibers running through HUB cans, and it weighs in at a featherweight 1.7 ounces. That's the kind of spec sheet you want on a part that lives at the hottest, highest pressure point of your whole setup.

Installing the HUB Direct Thread Mount

Swapping over takes just a few minutes. Remove the existing mount or QD module from your HUB compatible suppressor, thread this adapter into the 1.375-24 threads, and snug it down with a 3/4 inch open end wrench. From there the suppressor spins onto any M24x1 RH threaded barrel like any other direct thread can. It's worth noting this mount is designed to index against the shoulder of the barrel, which is what gives you consistent, repeatable alignment shot after shot.

Why Go Direct Thread

Direct thread mounting keeps things light, quiet, and concentric with fewer parts in the system. If your M24x1 threaded host is a dedicated suppressor gun that rarely sees the can come off, this is the cleaner way to run it. Yankee Hill Machine offers this adapter in a whole family of thread pitches, so you can set up one HUB suppressor to move between just about anything in the safe.

Key Specifications

  • Manufacturer: Yankee Hill Machine
  • Manufacturer Part Number: YHM-2189-M24X1RH
  • UPC: 841812102793
  • Suppressor Interface: 1.375"-24 HUB threads
  • Barrel Thread Pitch: M24x1 right hand
  • Material: 17-4 PH heat treated stainless steel
  • Finish: Black oxide
  • Bore Diameter: .45 caliber
  • Weight: 1.7 oz
  • Wrench Size for Install: 3/4" open end
  • Color: Black

What’s Included

  • YHM HUB Direct Thread Mount, M24x1 RH thread (YHM-2189-M24X1RH)

Frequently Asked Questions

Will the YHM HUB Direct Thread Mount fit my suppressor?

If your suppressor uses the industry standard 1.375"-24 HUB mounting interface, this adapter will thread right in. That covers a huge portion of modern centerfire cans from brands across the industry, since HUB has become the common rear thread spec. Just check your suppressor's documentation to confirm it's HUB compatible before ordering.

What do I need to install this direct thread mount?

Just a 3/4 inch open end wrench. Remove your suppressor's existing mount or QD module, thread this adapter into the rear of the can, and snug it down with the wrench. After that the suppressor threads directly onto any M24x1 RH barrel.

What calibers can I shoot through this mount?

The mount has a .45 caliber bore, so it will pass anything up to .45 as long as your suppressor itself is rated for the cartridge. The adapter is stainless 17-4 PH that's been heat treated, so the hardware is built to handle serious use. Always defer to your suppressor's caliber and barrel length ratings as the limiting factor.

Does this adapter index on the barrel shoulder or the muzzle crown?

This mount is designed to seat against the shoulder of the barrel, which is how it maintains consistent alignment and concentricity. That means your host barrel needs a properly cut shoulder behind the M24x1 threads. It's the standard setup on most threaded rifle and pistol barrels, so the majority of hosts are good to go.

Additional information

UPC

841812102793

Manufacturer

Manufacturer Part Number

YHM-2189-M24X1RH

Color

Black

Length

5.5500

Shipping Weight

0.168

Reviews

There are no reviews yet.

Be the first to review “YHM HUB Direct Thread Mount M24x1 RH, 1.375-24 Suppressor Adapter”