Description
Berry's Preferred Plated .45 Long Colt bullets hit the sweet spot for anyone loading up the classic .45 Colt cartridge. These are swaged lead cores that get fully encapsulated in copper, then run back through a carbide die and re-struck to a true .452" diameter. That double-struck process is why they shoot clean and consistent round after round, without the smoke and barrel leading you get from plain cast bullets. At 250 grains with a flat point profile, this is the traditional bullet weight the .45 Colt was built around going back to 1872.
What Makes These Berry's .45 Long Colt Plated Bullets Worth Loading
The copper plating fully surrounds the lead core, so there's no exposed lead at the muzzle and far less fouling in your bore, feeding ramps, and forcing cones. That means less scrubbing at the bench and more rounds downrange. They're priced well below jacketed bullets while delivering the accuracy that makes them a favorite for target work, plinking, and cowboy action shooting with single action revolvers and lever guns.
Load Data and Crimp Notes for the 250 gr FP
Berry's doesn't publish its own load data, but you can use any published jacketed or lead data as long as it matches the 250 grain weight and you stay under the bullet's max velocity of 1,250 fps. A lot of reloaders have good luck treating plated bullets like cast lead data and working up from there. You can run either a taper or a roll crimp, but keep it light. Over-crimping can cut through the plating and lead to core separation, which shows up as fouling and lost accuracy. A gentle crimp that just grips the bullet is all you need.
Specs on the Berry's Preferred Plated 250 Grain Flat Point
These measure out to a .614" bullet overall length with a listed cartridge OAL of 1.570", which keeps them playing nice across a wide range of .45 Colt chambers. Whether you're building light cowboy loads or standard pressure target rounds, these give you a clean, repeatable component to build on.
Key Specifications
- Manufacturer: Berry's Manufacturing
- Caliber: .45 Long Colt (.45 Colt)
- Bullet Diameter: .452"
- Bullet Weight: 250 Grain
- Bullet Profile: Flat Point (FP)
- Construction: Copper Plated, Swaged Lead Core, Double-Struck
- Quantity: 200 Count
- Max Velocity: 1,250 fps
- Bullet O.A.L.: .614"
- Recommended Cartridge O.A.L.: 1.570"
- Crimp: Taper or Roll (light)
- Manufacturer Part Number: 39579
- UPC: 711148395797
What’s Included
- 200 Berry's Preferred Plated .45 Long Colt .452" 250 gr FP bullets
Frequently Asked Questions
What load data should I use for these Berry's .45 Long Colt plated bullets?
Berry's doesn't publish its own load data, so you can use any published jacketed or lead data as long as it's for a 250 grain bullet. Many reloaders find that cast lead data works well for plated bullets and gives a good starting point. The key is staying under the bullet's max velocity of 1,250 fps and always starting low and working up.
Can I use a roll crimp on these plated bullets?
Yes, you can run either a taper or a roll crimp. Just keep it light so you don't cut into the copper plating. Over-crimping can cause core separation, which shows up as copper fouling and accuracy problems, so a gentle crimp that grips the case mouth is all you want.
What's the benefit of plated bullets over cast lead for .45 Colt?
The copper plating fully encapsulates the lead core, so there's no exposed lead and far less fouling in your barrel, feeding ramps, and forcing cones. That means a cleaner shooting experience and less scrubbing at the cleaning bench. They cost less than jacketed bullets while still delivering solid accuracy for target and action shooting.
Are these bullets good for cowboy action shooting?
Absolutely. The 250 grain flat point is the traditional .45 Colt bullet weight, and the flat profile feeds well through single action revolvers and lever guns. They're clean-shooting and affordable, which makes them a popular pick for the high round counts that cowboy action and target practice demand.




Reviews
There are no reviews yet.