0
0

Zaffiri Precision Glock 19 Gen 1-4 3.9″ Flush Barrel Black

UPC: 810220063224

$151.05

7 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

This Zaffiri Precision barrel is a straight swap for the factory 9mm barrel in your Glock 19 Gen 1-4, no gunsmith required. It comes machined from 416R stainless steel, then stress relieved and heat treated for long term durability, and finished in a deep black nitride coating that resists corrosion and looks sharp under the slide. The flush and crown profile keeps everything tucked in tight with the muzzle, giving it a clean look without any threading poking out past the barrel hood.

Inside, the chamber and bore are polished and cut with conventional rifling and a 1-in-10 twist rate, which handles a wide range of 9mm bullet weights and works well with lead, plated, or jacketed ammunition. The feed ramp is polished too, so you get smoother feeding regardless of what you are running through the gun. Zaffiri also machines an oversized lockup area into this barrel, which tightens things up compared to the stock Glock barrel and translates into noticeably better groups once you get some rounds downrange.

What Makes This Zaffiri Precision G19 Barrel Different

A lot of aftermarket barrels focus on looks alone, but this one is built to actually shoot better. The tighter tolerances at lockup mean less play between the barrel and slide, and that consistency shows up on target. You will also notice the large ZP logo machined into the portside of the lockup, a small detail that sets it apart from a plain jane replacement barrel.

Installing the Zaffiri Precision Barrel on Your Glock 19

Swapping this in follows the same steps as removing your factory barrel: field strip the slide, drop the old barrel out, and set this one in its place. Because the tolerances run tighter than stock, give it a few dozen dry cycles with some quality lubricant on the rails, breach face, and barrel before you head to the range. That short break-in period helps everything settle into a smooth, reliable lockup.

Keep in mind this particular barrel is built for Gen 1-4 Glock 19 pistols and is the non-threaded flush and crown version, so it will not work with Gen 5 frames or accept muzzle devices. If you are looking to run a suppressor or comp down the line, Zaffiri also makes a threaded version worth checking into instead.

Key Specifications

  • Manufacturer: Zaffiri Precision
  • Manufacturer Part Number: BA-G19G14-FC-BN
  • UPC: 810220063224
  • Caliber: 9mm Luger
  • Barrel Length: 3.9 inches
  • Finish: Black Nitride
  • Material: 416R Stainless Steel
  • Twist Rate: 1-in-10 inch
  • Barrel Style: Flush and Crown (non-threaded)
  • Compatibility: Glock 19 Gen 1-4
  • Feed Ramp: Polished
  • Country of Origin: Made in USA

What’s Included

  • Zaffiri Precision 3.9" Flush and Crown barrel

Frequently Asked Questions

Will this Zaffiri Precision barrel fit my Glock 19 Gen 5?

No, this particular barrel is built specifically for Glock 19 Gen 1-4 pistols. Gen 5 Glock 19s use a different length and lockup, so Zaffiri makes a separate barrel for that generation. Always double check your Glock's generation before ordering a replacement barrel.

Do I need a gunsmith to install this barrel?

No, this is a true drop-in replacement that swaps in the same way you would remove and reinstall a factory barrel. A basic field strip is all it takes, though running the slide back and forth a few dozen times with some good lubricant before heading to the range helps everything settle into place since the tolerances run a bit tighter than stock.

What kind of ammo works with this barrel?

The polished chamber and bore are cut to handle lead, plated, and jacketed 9mm bullets without issue. The 1-in-10 twist rate stabilizes a wide range of bullet weights, so you are not locked into one specific type of ammunition.

Can I add a compensator or suppressor to this barrel later?

Not with this one, since it is the flush and crown non-threaded version with no muzzle threading. If you want the option to run a comp or suppressor down the road, Zaffiri Precision offers a threaded barrel for the Glock 19 as well.

Additional information

UPC

810220063224

Manufacturer

Manufacturer Part Number

BA-G19G14-FC-BN

Barrel Length

3.9"

Caliber/Gauge

9mm

Color

Black

Product Type

Barrel

Reviews

There are no reviews yet.

Be the first to review “Zaffiri Precision Glock 19 Gen 1-4 3.9″ Flush Barrel Black”