Description
When Lancer designed the L7AWM, they took the battle-proven engineering of their L5AWM 5.56 magazine and scaled it up for the .308 Winchester platform, borrowing design elements from the SIG Sauer MPX to create a magazine that stands apart from the competition. The result is a hybrid design that marries the lightweight benefits of polymer with the durability and reliability you need in a professional-grade magazine.
Steel Feed Lips Built Into the L7AWM Design
Unlike standard polymer magazines where feed lips are just reinforced, the L7AWM wraps a hardened steel sleeve nearly all the way around the magazine body. This isn't just an upgrade—it's fundamental to how the magazine performs. The feed lips won't deform from repeated mag changes, and the steel insert on the front prevents the dimpling that can plague the top of a magazine over time. You get the weight savings and durability of polymer without compromising the most critical wear points of the mag.
Built-In Versatility for Any Condition
Every L7AWM comes standard with a switchable drain lock on the floor plate. Toggle it one way and water drains freely through the baseplate—critical if you're operating near water. Flip it the other way and you seal it up for dusty, sandy environments. This level of thoughtfulness sets Lancer apart. The non-tilt follower on a stainless steel spring also means you can keep the magazine loaded indefinitely without degrading spring performance, something a lot of people don't think about until they've worn out cheaper alternatives.
Built for Work, Not Just the Range
The polymer body is impact and chemical resistant, engineered to survive from -40 degrees to +180 degrees Fahrenheit. Deep waffle cuts on the sides and rear combined with stippling give you a solid grip even with gloves or in wet conditions. The L7AWM works with most AR-10 and SR-25 pattern rifles including DPMS AR-10, SIG 716, LMT, LM308, POF P308, and S&W M&P-10. Just verify compatibility with your specific platform before purchasing.
Key Specifications
- Manufacturer: Lancer Systems
- Model: L7AWM GEN 2
- Manufacturer Part Number: L7-G2-05-BLK
- UPC: 738435624422
- Caliber: .308 Winchester / 7.62 NATO / 6.5 Creedmoor
- Capacity: 5 Rounds
- Color: Opaque Black
- Material: Polymer Body with Hardened Steel Feed Lips
- Weight: 0.4 lbs
- Dimensions: 1.5 x 4 x 5 inches
- Construction: Hybrid Polymer/Steel with Non-Tilt Follower
- Operating Temperature Range: -40°F to +180°F
- Country of Origin: USA
What’s Included
- 1x Lancer L7AWM GEN2 .308WIN 5-Round Magazine
Frequently Asked Questions
Will the L7AWM 5-round magazine work in my AR-10 or SR-25 rifle?
The L7AWM is designed for AR-10 and SR-25 pattern rifles, including DPMS AR-10, SIG 716, LMT, LM308, POF P308, and S&W M&P-10. It's not compatible with Armalite AR-10B, Rock River Arms LAR-8, or other rifles using M14, FN FAL, or HK 91/G3 pattern magazines. Double-check your rifle's specifications before purchasing to confirm compatibility.
Can I trust the 5-round L7AWM for loaded storage?
Yes. The L7AWM features a non-tilt follower on a stainless steel spring that handles loaded magazine storage without degrading performance. Lancer engineered these magazines to perform reliably whether the magazine is loaded or empty, though you'll want to store in a cool, dry place like any magazine.
What makes the L7AWM's feed lips different from other polymer magazines?
Instead of just reinforcing the lips with steel inserts, the L7AWM wraps a hardened steel sleeve nearly around the entire magazine with an additional steel insert on the front. This design prevents the feed lips from bending or deforming under hard use and eliminates the dimpling that happens on the magazine's front during repeated mag changes.
What is the switchable drain lock and when would I use it?
The drain lock is located on the floor plate and can be toggled to allow water to drain out through the baseplate, or sealed to block drainage. Use the open position if you're operating near water or wet environments. Use it sealed in extremely dusty or sandy conditions where you don't want debris entering the magazine through the drain holes.





Reviews
There are no reviews yet.