Description
Gas blocks don't get much attention until they fail, and that's exactly why SOLGW built this one the way they did. The Liberty Gas Block .750 is a low-profile design machined from 4140 steel and finished with a nitride coating, giving it the surface hardness and corrosion resistance needed for a part that sits directly in the path of hot, dirty propellant gas every time you pull the trigger. It's sized for the .750 inch gas block journal diameter found on most mil-spec AR-15 barrels, so fitment on a standard build is straightforward.
What Makes the Liberty Gas Block .750 Worth Running
The block uses SOLGW's V2 gas port sizing, which is matched to the .750 journal diameter to keep the gas seal efficient without dumping excess pressure into the system. That matters more than people think, because an oversized or poorly matched port is a common culprit behind excess bolt carrier velocity, extra felt recoil, and unnecessary wear on your BCG over time. The nitride finish also holds up well to carbon buildup, which makes cleaning easier whether you're running the rifle suppressed or not.
Fit and Installation Notes
This gas block sits directly on the barrel's gas journal shoulder and locks down with knurled set screws onto a properly dimpled barrel. Because it's a true low-profile design, it tucks under nearly any free float handguard on the market, so you're not stuck hunting for a specific rail to match it. Keep in mind it ships with the block and set screws only, no gas tube included, so plan on pairing it with the correct length gas tube for your build.
Built by a Company That Sweats the Small Parts
Sons of Liberty Gun Works has built a reputation on getting the small details right on components that most shooters never think twice about, and this gas block is a good example of that approach. Whether you're finishing out a custom upper, replacing a factory gas block that's seen better days, or just want something built to last through years of range trips and duty use, this is a solid, no-nonsense option that does its job without drama.
Key Specifications
- Manufacturer: Sons of Liberty Gun Works
- Model: Liberty Gas Block
- Manufacturer Part Number: SOLGW-LGB-750
- UPC: 657628674344
- Material: 4140 heat treated steel
- Finish: Nitrided, Black
- Gas Block Journal Diameter: .750 inch
- Profile: Low profile
- Attachment Method: Knurled set screws
- Gas Port Specification: V2 sizing
- Color: Black
- Product Type: Gas Block
What’s Included
- SOLGW Liberty Gas Block .750
- Knurled set screws
Frequently Asked Questions
Does the SOLGW Liberty Gas Block .750 come with a gas tube?
No, this gas block ships with just the block itself and the knurled set screws needed to mount it. You'll need to pick up a gas tube separately in the correct length for your barrel and gas system.
What barrel is this gas block compatible with?
This gas block is built for a .750 inch gas block journal diameter, which is the standard size on most mil-spec AR-15 barrels. Just double check your barrel's journal diameter before ordering since some pencil profile barrels run a smaller .625 inch journal.
How does this gas block attach to the barrel?
It sits on the gas block shoulder and is secured with knurled set screws onto a properly dimpled barrel. It's also able to be pinned if you prefer that method for a more permanent install.
Will this fit under my free float handguard?
Yes, this is a true low-profile gas block designed to clear most free float handguards on the market. That gives you the flexibility to run an extended handguard without gas block interference.





Reviews
There are no reviews yet.