Description
Direct thread mounting is still the simplest way to run a suppressor, and the IWI HUB-T adapter keeps it that way. This stainless steel adapter threads onto any 1/2×28 barrel and gives your HUB-compatible can a solid, no-nonsense home. That 1/2×28 pitch covers a huge chunk of the market, from 5.56 and .223 rifles to 9mm hosts, so odds are good you already own something this bolts right onto.
What Makes the HUB-T Adapter Different
IWI built this around their HUB+ system, which takes the familiar 1.375×24 HUB rear thread pattern and adds a taper surface where the mount meets the silencer. That extra contact area does real work. You get more engagement between the adapter and the can, which means a more consistent interface at the muzzle, better repeatability, and less worry about things backing off during a long range session. And since it is built on the HUB standard, it plays nice with existing HUB suppressors from other brands, not just IWI's own IWS line.
Stainless Steel Where It Counts
The stainless construction is the right call for a part that lives at the muzzle. It shrugs off heat, carbon, and the general abuse that comes with suppressed shooting, and the black finish keeps it looking clean on just about any host. Direct thread setups like this are a favorite for bolt guns, hunting rifles, and range rigs where you set the can once and leave it alone. No QD mount to buy, no proprietary muzzle device to track down, just threads doing what threads do.
Running the IWI HUB-T on Your Setup
Installation is straightforward: thread the adapter into the rear of your HUB suppressor, snug it down, then spin the whole assembly onto your barrel. If your rifle wears 5/8×24 threads instead, IWI makes this same adapter in that pitch too. For anyone running an IWS suppressor or any HUB can on a 1/2×28 barrel, this is the clean, simple mounting answer.
Key Specifications
- Manufacturer: IWI – Israel Weapon Industries
- Model: HUB-T
- Manufacturer Part Number: IWSHUBSS28
- UPC: 818004025130
- Product Type: Direct Thread Suppressor Adapter
- Barrel Thread Pattern: 1/2×28
- Suppressor Thread Pattern: 1.375×24 (HUB)
- Mounting System: IWI HUB+ with taper engagement surface
- Material: Stainless Steel
- Color: Black
- Compatibility: IWI IWS silencers and standard HUB-pattern suppressors
What’s Included
- IWI HUB-T stainless steel direct thread adapter, 1/2×28
Frequently Asked Questions
Will the IWI HUB-T adapter work with suppressors from other brands?
Yes. The HUB-T is built on the industry-standard 1.375×24 HUB rear thread pattern, so it fits HUB-compatible suppressors regardless of who made the can. IWI's HUB+ taper adds extra engagement with their own IWS silencers, but the adapter remains reverse compatible with standard HUB systems.
What firearms use 1/2×28 barrel threads?
1/2×28 is one of the most common thread pitches out there. You'll find it on most 5.56 and .223 rifles, including nearly every AR-15, plus the majority of 9mm pistols and pistol-caliber carbines with threaded barrels. If your muzzle threads are 5/8×24 instead, which is typical for .30 caliber rifles, IWI offers this adapter in that pitch as well.
What makes the HUB+ design different from a basic direct thread adapter?
IWI added a taper surface to the standard HUB thread pattern, which creates more contact between the adapter and the suppressor. That extra engagement gives you a more secure lockup and a more consistent muzzle-to-suppressor interface, which helps with repeatability and keeps things from loosening under fire.
How do I install the HUB-T DT adapter?
Thread the adapter into the rear of your HUB-compatible suppressor and torque it down snug, then thread the assembled unit onto your 1/2×28 barrel. Many folks add a small amount of a high-temp thread compound like Rocksett on the suppressor side for extra security. Check it periodically during long shooting sessions, as you would with any direct thread setup.




Reviews
There are no reviews yet.