0
0

Lee 300 WSM Micrometer Precision Bullet Seater Die (92345)

UPC: 734307923457

$27.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Getting your seating depth right is where accuracy really comes together, and this Lee Micrometer Precision Bullet Seater takes the guesswork out of it for your 300 WSM reloads. Instead of fighting with a screwdriver and a wrench every time you want to tweak overall length, you turn a laser-engraved micrometer head that reads in increments of one thousandth of an inch, just like a depth micrometer. Adjustment is smooth and infinitely variable, so dialing in a load and then returning to it later is simple and repeatable.

What the 300 WSM Micrometer Seater Does on the Press

This is a dead length seating die, meaning the die body contacts your shell holder at the top of the stroke. That contact sets a hard, consistent reference point, so your seating depth stays uniform from the first round to the last. The floating bullet guide is the other half of the equation. It holds the case mouth and bullet in alignment with the seating stem, and testing has shown that sliding guides like this produce cartridges with very low bullet runout, which translates directly into better consistency downrange.

Features That Make the Lee Precision Seater Worth a Look

The bullet seating stem is machined and burnished so it seats nearly any point style bullet without marring the tip or leaving a ring. The floating guide is also reversible: unthread it and reinstall it, and you can seat and crimp in a single operation, which is a feature unique to Lee. The die carries the standard 7/8-14 thread, so it drops into any standard reloading press, and it ships with Lee's Ultimate Lock Ring to keep everything locked tight once you have it set.

Lee dies have a loyal following among reloaders who have put plenty of accurate ammo through them over the years, and this micrometer seater brings genuine precision to a cartridge like the 300 WSM that rewards careful load development. If you are chasing tight groups and want an easy way to fine-tune your seating depth, this one earns its spot on the bench.

Key Specifications

  • Cartridge: 300 WSM
  • Die Type: Micrometer Precision Bullet Seater (Dead Length)
  • Adjustment: Laser-engraved micrometer, reads in .001 inch increments
  • Bullet Guide: Floating, reversible for seat-and-crimp
  • Seating Stem: Machined and burnished, mark-free seating
  • Thread: 7/8-14 standard
  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 92345
  • UPC: 734307923457
  • Country of Origin: Made in the U.S.A.
  • Shipping Weight: 0.26 lb

What’s Included

  • Lee 300 WSM Micrometer Precision Bullet Seater Die
  • Lee Ultimate Lock Ring
  • Instructions

Frequently Asked Questions

Does the 300 WSM Micrometer Seater crimp as well as seat?

By default it is set up as a dead length seater that only positions the bullet, which is how you get the most uniform seating depth. The floating bullet guide is reversible, though, so you can unthread it and reinstall it to seat and crimp in one operation. Seating while crimping is best left to more experienced reloaders using trimmed brass and bullets with a crimp groove.

Will this die fit my reloading press?

Yes. It uses the industry-standard 7/8-14 thread, so it threads into any standard single-stage or progressive press. It also comes with Lee's Ultimate Lock Ring to hold your setting securely once you have it dialed in.

How precise is the micrometer adjustment?

The micrometer thimble and body are laser engraved with divisions representing one thousandth of an inch, so it reads just like a depth micrometer. Adjustment is smooth and infinitely variable rather than clicking into set steps, which makes it easy to fine-tune seating depth and return to a favorite load later.

Is this a full die set or just the seater?

This is the bullet seating die only, not a complete die set. You will still need a sizing die for your 300 WSM brass, and many reloaders pair it with a Lee Factory Crimp die to finish their loads.

Additional information

UPC

734307923457

Manufacturer

Manufacturer Part Number

92345

Shipping Weight

0.26

Reviews

There are no reviews yet.

Be the first to review “Lee 300 WSM Micrometer Precision Bullet Seater Die (92345)”