Description
The Streamlight ProTac Rail Mount HP-X Pro USB is built for one thing above all: reach. Where a lot of weapon lights chase raw lumen numbers and end up washing out at distance, this one funnels 800 lumens into 105,000 candela of tightly focused intensity that throws a usable hotspot out to roughly 648 meters, or about 2,125 feet. That kind of punch cuts through smoke, fog, and glare where a floodier beam would just bounce back at you. The housing is machined from 6000-series aircraft aluminum with a Mil-Spec Type II anodized finish in desert tan, and the glass lens carries an anti-reflective coating.
What Sets the HP-X Pro USB Apart
The multi-fuel setup is the real convenience here. It ships with a rechargeable SL-B26 Li-Ion pack that charges right off a USB-C cable, so you pop the battery out, plug it in, and top it off without pulling the light from your rifle. If you're deep in the field or the pack runs low, two CR123A lithium cells drop right in as a backup. On the rechargeable pack you'll get about two hours on high, and dialing down to the 55-lumen low mode stretches runtime well past 20 hours when you don't need the full throw.
Mounting and Switching the ProTac Rail Mount HP-X Pro
The integrated clamp locks onto any MIL-STD-1913 Picatinny rail, and Streamlight includes an offset M-LOK mount for scout-style positioning on M-LOK handguards. The Jack-Cap tail cap is where the switch redundancy comes in: run it as a simple push-button, or plug in the included momentary pressure pad for a remote setup. Either way, TEN-TAP programming lets you pick from three operating profiles, whether you want high/strobe, high only, or a low/high combo. It's rated IPX7 waterproof without the remote switch and IPX4 with it installed, plus a 2-meter impact rating, so it holds up to weather and recoil on a working gun.
Key Specifications
- Manufacturer: Streamlight
- Manufacturer Part Number: 89029
- UPC: 080926890299
- Color: Desert Tan
- High Output: 800 lumens / 105,000 candela
- Low Output: 55 lumens / 7,600 candela
- Max Beam Distance: 648 meters (2,125 ft)
- Runtime (High): 2 hrs (SL-B26) / 1.5 hrs (CR123A)
- Battery: SL-B26 USB rechargeable or 2x CR123A
- Programming: TEN-TAP, 3 selectable programs
- Housing: 6000-series machined aluminum, Type II anodized
- Mounting: MIL-STD-1913 rail clamp + M-LOK mount
- Length: 5.63 inches
- Weight: 6.4 oz (CR123A) / 7.0 oz (SL-B26)
- Water Rating: IPX7 (push-button) / IPX4 (remote switch)
- Impact Rating: 2 meters
What’s Included
- ProTac Rail Mount HP-X Pro USB light
- M-LOK mount
- Momentary pressure switch
- SL-B26 rechargeable battery pack (1)
- USB charging cord
- Mounting hardware
Frequently Asked Questions
How far will the ProTac Rail Mount HP-X Pro USB actually throw?
On high it puts out 105,000 candela and a rated beam distance of 648 meters, which is roughly 2,125 feet. That focused, high-candela beam is built for distance and target identification rather than wide close-up spill. It's a great fit for anyone who needs to see and identify well beyond typical carbine-light range.
Can I run CR123A batteries if I don't want to recharge?
Yes. It's a multi-fuel light, so it takes the included SL-B26 rechargeable pack or two CR123A lithium cells as a backup. That flexibility is handy when you're away from a charger and just want to drop in fresh primaries.
What mounts does the HP-X Pro USB fit?
The integrated clamp attaches directly to MIL-STD-1913 Picatinny rails, and Streamlight includes an offset M-LOK mount for scout-style positioning on M-LOK handguards. That covers most modern rifle, carbine, and PCC setups right out of the box.
How do the switch options work on this light?
The Jack-Cap tail cap gives you switch redundancy, so you can run it as a straightforward push-button or plug in the included momentary pressure pad for remote activation. TEN-TAP programming also lets you choose between high/strobe, high only, or low/high operating profiles to match how you like to run it.





Reviews
There are no reviews yet.