0
0

Redding 6mm GT Type-S Match Bushing Full Length 2-Die Set

UPC: 611760361999

$249.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The 6mm GT built its name in PRS and NRL circles by feeding clean from AICS mags, burning modest powder charges, and putting rounds where you point them. This Redding Type-S Match set is the kind of tooling that cartridge deserves. You get a Type-S bushing full-length sizing die and a Redding Competition bullet seating die, two tools that cover the whole job of turning once-fired brass back into match ammo with real control over the details that matter.

What the Type-S Bushing Sizing Die Brings to the Bench

The heart of this set is the bushing system. Instead of a fixed-diameter neck, you pick an interchangeable bushing in .001 inch increments, which lets you set exactly how much neck tension you want on the bullet. The bushing self-centers on the case neck to help keep runout low and concentricity tight. The adjustable decapping rod lets you size only part of the neck length if you prefer, and the die ships with a standard sizing button plus a decapping pin retainer so you can run it with or without the button depending on whether your brass has been neck-turned. Pull the bushing and internals out and it even works as a body die when you just want to bump the shoulder.

Seating Depth Control with the Competition Seating Die

The seating die uses a precision-ground stem matched to bullet diameter and a sliding sleeve that aligns the bullet with the case before it ever starts into the neck. The micrometer head is marked in .001 inch increments and adjusts smoothly without clicks, so chasing the lands or tuning a node is quick and repeatable. There's a setting feature on the micrometer that lets you lock in your rifle's preferred depth and return to it later.

Dialing In the 6mm GT

If you're loading for a cartridge known for forgiving load development and long brass life, this set gives you the precision to take advantage of it. Keep in mind bushings and a shellholder are sold separately, so you'll want to measure a few loaded rounds and order the right bushing before your first session.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 36199
  • UPC: 611760361999
  • Caliber: 6mm GT
  • Die Type: Type-S Match Bushing Full Length 2-Die Set
  • Dies Included: Type-S Bushing Full Length Sizing Die, Competition Seating Die
  • Neck Sizing: Interchangeable bushings in .001 inch increments
  • Seating Adjustment: Micrometer head in .001 inch increments, click-free
  • Seating Alignment: Sliding sleeve with precision-ground stem
  • Thread: 7/8-14
  • Bushings Included: No, sold separately
  • Shellholder Included: No, sold separately
  • Country of Origin: United States

What’s Included

  • Type-S Bushing Full Length Sizing Die with decapping rod, standard sizing button, and decapping pin retainer
  • Redding Competition Bullet Seating Die with sliding sleeve and micrometer adjusting head
  • Die box
  • Instructions

Frequently Asked Questions

Does the Redding 6mm GT Type-S set come with bushings?

No, the bushings are sold separately so you can match neck tension to your exact brass and chamber. The easiest way to pick one is to measure the neck diameter of a few loaded rounds and subtract about .001 to .002 inch for a good press fit. A shellholder is also sold separately.

What's the difference between the Type-S bushing die and a standard full length die?

A standard full length die sizes the neck to one fixed diameter, while the Type-S uses interchangeable bushings so you control exactly how much the neck gets squeezed. That bushing self-centers on the case neck to help keep concentricity tight. It gives reloaders chasing match accuracy a lot more say over neck tension.

Can the sizing die be used as a body die?

Yes. By removing the bushing and the internal parts, the Type-S full length die works as a body die for bumping the shoulder without touching the neck. It's a handy option if you neck size separately or just want to bump brass between firings.

Why is this set a good match for the 6mm GT?

The 6mm GT was designed for PRS and NRL shooting with forgiving load development, low recoil, and long brass life. The Type-S bushing sizer and micrometer competition seater let you fine-tune neck tension and seating depth to get the most out of that accuracy potential. Precision tooling like this helps your handloads live up to what the cartridge can do.

Additional information

UPC

611760361999

Manufacturer

Manufacturer Part Number

36199

Reviews

There are no reviews yet.

Be the first to review “Redding 6mm GT Type-S Match Bushing Full Length 2-Die Set”