Description
Threaded pistol barrels come in a bunch of different pitches, and 9/16-24 is the standard you'll run into on most .40 caliber threaded barrels. This piston from Dead Air is the piece that lets your Mojave 9 or Mojave 45 mount up to those barrels, with a bore sized for .40 caliber projectiles. If your can came with a different thread pitch installed, this is the part that gets you onto a .40 host without buying a whole new suppressor.
Why the Mojave Piston Matters on a Tilting Barrel
Most centerfire pistols use a tilting-barrel design, which means the barrel drops and cams during cycling. Hang a suppressor off the muzzle without a booster and that extra weight can keep the action from running right. The Mojave piston works inside Dead Air's PB500 booster assembly with the booster spring, letting the can decouple during recoil so your pistol cycles the way it should. It's a small part doing an important job, and having the correct thread pitch and bore for your host is not something to guess on.
Built by Dead Air for the Mojave Line
Dead Air makes these pistons in the full spread of common pistol thread pitches, and this one, part number PB442, covers the 9/16-24 spec with a .40 caliber bore. Fitment is specific to the Mojave 9 and Mojave 45, so it pairs with the booster system those cans were designed around. Swapping pistons is quick, which makes it easy to move one suppressor between a 9mm host and a .40 without much fuss at the bench.
If you shoot a threaded .40 pistol and own a Mojave, this is the piece that ties the two together. Keep one in the range bag and your can gets a lot more versatile.
Key Specifications
- Manufacturer: Dead Air Silencers
- Manufacturer Part Number: PB442
- UPC: 810128161909
- Thread Pitch: 9/16-24
- Bore / Caliber: .40 Caliber
- Compatible Suppressors: Dead Air Mojave 9, Mojave 45
- Works With: PB500 Mojave Booster Assembly and booster spring
- Intended Host Type: Tilting-barrel handguns
- Product Type: Suppressor booster piston
What’s Included
- One Dead Air Mojave 9/16-24 .40 caliber piston (PB442)
Frequently Asked Questions
Which suppressors does this Mojave piston fit?
This piston is made specifically for the Dead Air Mojave 9 and Mojave 45 suppressors. It works inside the Mojave booster assembly (PB500) along with the booster spring. It is not interchangeable with Dead Air's P-Series pistons, which are a separate part line, so double check which can you own before ordering.
Why do I need a piston for a tilting-barrel pistol?
Most semi-auto pistols use a tilting barrel, and adding suppressor weight to the muzzle can prevent the action from cycling reliably. The piston and booster spring let the suppressor briefly decouple from the barrel during recoil, so the pistol runs like it should. It's the standard solution for running a can on a handgun.
Will the 9/16-24 thread pitch fit my barrel?
9/16-24 is the most common thread pitch on .40 caliber threaded pistol barrels in the US. Check the markings on your barrel or the manufacturer's specs to confirm before ordering. Dead Air offers Mojave pistons in other pitches like M14.5x1LH if your barrel uses a metric thread.
Can I use this .40 caliber piston with a 9mm pistol?
The bore on this piston is sized for .40 caliber, so it will pass 9mm projectiles, but the 9/16-24 threads have to match your barrel. Dead Air makes dedicated 9mm-bore Mojave pistons in 1/2-28 and M13.5x1LH for the common 9mm thread pitches, which are the better pick for a 9mm host with those threads.




Reviews
There are no reviews yet.