0
0

KG2 Bore Polish 4oz – Mild Abrasive Bore Cleaner & Copper Remover

UPC: 695134006020

$17.00

8 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

KG2 Bore Polish sits in a category most cleaners never touch. It's a mild liquid abrasive rated at 1200-1400 grit, roughly the feel of a fine brass polish, and it works by smoothing the lands and grooves rather than blasting your barrel back to bare steel. The idea, which came out of maintaining bore integrity on sniper and precision rifles, is to gently remove the copper and lead wash sitting on the rifling while leaving the copper embedded deep in the micro-fractures alone. That trick leaves a slicker bore and often means you can skip the usual fouling shots.

How KG2 Bore Polish Fits Your Cleaning Routine

This one goes on last, after the heavy lifting is done. Run your carbon remover and copper cleaner first, punch the barrel clean, then bring out the KG2. Shake it well, since the abrasive settles, then saturate a patch and work it back and forth with a snug jag or wrap it around a bore brush to reach into the rifling. Barrels that copper up fast tend to slow down noticeably after a few polishing sessions.

What Sets KG2 Bore Polish Apart

There's no ammonia in the formula, so you're getting a mechanical polish instead of a harsh chemical strip. Folks have used it to bring old barrels back to life, from M1 Garands to modern bolt guns, and it's a favorite among precision and long-range crowds. Think of it as fire polishing, a gentler and more forgiving cousin to fire lapping that lets you refine a bore without the same risk.

A quick tip from real-world use: shake the bottle thoroughly every time and clean the bore well afterward. The abrasive is meant to be worked and then removed, so a proper wipe-down and a protective oil pass finishes the job right. Used the way it's intended, KG2 is one of those quiet workhorses that earns a permanent spot on the bench.

Key Specifications

  • Manufacturer: KG Industries (KG Products)
  • Product: KG-2 Bore Polish
  • Volume: 4 oz (118 ml)
  • Type: Mild abrasive liquid bore polish
  • Grit Rating: 1200-1400 grit soft compound
  • Ammonia: No ammonia
  • Removes: Copper and lead wash from lands and grooves
  • Best Use: Final polishing step after carbon and copper cleaning
  • UPC: 695134006020
  • Weight: 4 oz

What’s Included

  • One 4oz bottle of KG2 Bore Polish

Frequently Asked Questions

When should I use KG2 Bore Polish in my cleaning process?

KG2 is the last step, not the first. Run your carbon remover and copper cleaner, then patch the bore fully clean before bringing out the polish. Applying it to a clean barrel lets the mild abrasive smooth the rifling instead of just grinding through fouling.

How do I apply KG2 Bore Polish?

Shake the bottle well since the abrasive settles to the bottom, then saturate a patch and work it back and forth with a tight-fitting jag. Some folks wrap a KG2-soaked patch around a bore brush to reach deeper into the lands and grooves. Follow up by cleaning the bore thoroughly and running a protective oil.

Does KG2 Bore Polish contain ammonia?

No, KG2 is ammonia-free. It relies on a fine 1200-1400 grit mechanical abrasive rather than harsh chemistry to lift copper and lead wash. That makes it a gentler way to condition a bore compared to aggressive ammonia-based copper solvents.

Will KG2 really reduce the need for fouling shots?

That's the whole idea behind it. By polishing the lands and grooves while leaving copper embedded in the micro-fractures alone, KG2 leaves a slicker, more consistent bore surface. Precision and long-range shooters use it specifically to cut down on those first cold-bore fouling shots.

Additional information

UPC

695134006020

Manufacturer

Reviews

There are no reviews yet.

Be the first to review “KG2 Bore Polish 4oz – Mild Abrasive Bore Cleaner & Copper Remover”