Description
This Trophy Grade load represents what you get when a manufacturer puts its reputation behind every box: Nosler-produced brass paired with their AccuBond bonded core bullets, all manufactured to exacting tolerances and hand-packaged. You're looking at ammunition that's been designed from the ground up to deliver the kind of consistency that makes the difference between zeroing your rifle at home and making clean, ethical kills in the field.
The 200 grain AccuBond bullet sits right in the sweet spot for the 325 WSM cartridge. It leaves the muzzle at 2900 feet per second carrying roughly 3,734 foot-pounds of energy, which is plenty for the elk, moose, and larger deer that define this cartridge's purpose. The AccuBond's bonded core couples Nosler's copper-alloy jacket with a lead-alloy core through an exclusive manufacturing process that eliminates voids and weakness points. The white polymer tip protects against deformation while guiding expansion on impact, and the boat-tail base creates a platform for large diameter mushroom formation.
Trophy Grade Quality Control
Where Nosler Trophy Grade separates itself is in the manufacturing process. Cases get checked for correct length, necks are sized and trued, and flash holes are inspected for proper alignment. Each round benefits from Nosler's ballistics team input and gets hand-packed to ensure nothing gets damaged before it reaches you. This isn't the kind of attention most factory ammunition receives, which is why these loads often compete with hand loads in terms of consistency.
Proven AccuBond Performance
The AccuBond design strikes a practical balance for hunting. The bullet maintains about 65 to 70 percent of its weight, providing deep penetration with a controlled wound channel. It needs impact velocity around 1800 fps to expand reliably, which this load achieves well beyond typical hunting ranges. Field reports from AccuBond users consistently show performance from close quarters to 500 yards, with the bullet producing controlled expansion and excellent weight retention across a wide range of impact angles.
Key Specifications
- Caliber: .325 Winchester Short Magnum
- Bullet Weight: 200 grains
- Bullet Type: Spitzer AccuBond
- Muzzle Velocity: 2900 fps
- Muzzle Energy: 3734 ft-lbs
- Case Material: Brass
- Rounds Per Box: 20
- Primer Type: Boxer (Centerfire)
- Suitable Game: Elk, Moose, Large Deer
- Recommended Barrel Twist: 1 in 10 inches
- Manufacturer: Nosler
- Model Number (MPN): 60077
- UPC: 054041600774
- Country of Origin: United States
What’s Included
- 20 rounds of Nosler Trophy Grade 325 WSM ammunition
- Loaded with 200 grain AccuBond bullets
- Nosler custom brass cases
- Centerfire Boxer primers
Frequently Asked Questions
What game is this 325 WSM load best suited for?
This load shines for elk, moose, and large bear. The 200 grain AccuBond carries plenty of energy to handle the largest North American game at practical hunting distances. The 325 WSM in this weight was specifically designed as a middle ground between smaller magnum cartridges and the heaviest hitters, making it effective from short range through 300+ yards with proper shot placement.
How does the AccuBond bullet perform at varying distances?
The AccuBond is engineered to perform across a wide velocity range. It needs minimum impact velocity around 1800 fps to expand properly, which you'll maintain well beyond 400 yards with this load. At closer ranges, the bonded core prevents the overly rapid expansion that can waste velocity, while at distance it expands reliably when impact velocity drops. Recovered bullets typically show 65-70% weight retention and controlled mushrooming.
Is Trophy Grade ammunition reloadable?
Yes. These cases are new production, non-corrosive boxer-primed brass that can be reloaded. Nosler brass is known for durability and consistency, so reloaders often find these casings worth retaining for future handloads.
How does this ammunition compare to hand loads?
Nosler Trophy Grade ammunition is held to standards that rival quality hand loads. The hand-packed rounds, quality control during manufacturing, and input from Nosler's ballistics team result in consistency that many reloaders aim for but don't always achieve. For hunters without time or equipment for handloading, this ammunition delivers the accuracy and reliability you'd expect from custom loads.




Reviews
There are no reviews yet.