Description
The Radian Model 1 in 6mm ARC is what happens when a company obsessed with tight tolerances turns its attention to the AR-15's long-range potential. This is a complete upper assembly built around a 14.5-inch fluted 416R stainless barrel with a pinned and welded Dead Air KeyMo flash hider, bringing the overall length up to a manageable 16 inches. Drop it onto a standard AR-15 lower and you've got a rifle punching well above what a 5.56 gun can manage, with flatter trajectories and better wind performance the farther out you push.
What the Model 1 Upper Brings to the Table
The 6mm ARC was designed by Hornady to squeeze near-.308 ballistics out of the AR-15 platform, and this upper is built to take full advantage. The 1-7 twist barrel is tuned for the heavy, high-BC bullets in the 103 to 108 grain range that make this cartridge shine at distance, staying supersonic well past 1,000 yards in the right hands. Recoil stays mild, which means faster follow-up shots and easier spotting of your own hits. Radian's proprietary extended aluminum handguard locks to the receiver with a stainless steel anti-rotation pin and runs Magpul M-LOK slots for lights, bipods, and whatever else your setup calls for.
Why Grey and 6mm ARC Just Work
Beyond the barrel, this is a genuinely feature-rich package. You get fully ambidextrous controls, a lightweight forward assist, M4 feed ramps, and the billet 7075-T6 receiver finished in Radian's Grey Cerakote. It ships with the enhanced black nitride M16 bolt carrier group and the suppressor-optimized Raptor-SD ambidextrous charging handle, both proven pieces that plenty of builders buy on their own.
Every Model 1 is assembled by hand, one at a time, then inspected, test fired, and cleaned by a trained gunsmith before it goes out the door. It's a build-quality standard you feel the first time you cycle the action, and it's backed by Radian's lifetime guarantee. Whether you're chasing coyotes at distance, ringing steel, or just want the most capable AR-15 upper you can bolt on, this one delivers.
Key Specifications
- Manufacturer: Radian Weapons
- Model: Model 1 Complete Upper
- Manufacturer Part Number: R0900
- UPC: 810098420921
- Caliber: 6mm ARC
- Barrel Length: 14.5" (16" overall with pinned/welded flash hider)
- Barrel Material: 416R Stainless Steel, Fluted
- Twist Rate: 1:7
- Gas System: Mid-Length, Direct Impingement
- Muzzle Thread: 5/8×24
- Muzzle Device: Dead Air KeyMo Flash Hider (pinned & welded)
- Upper Receiver: Billet 7075-T6 Aluminum with M4 Feed Ramps
- Handguard: Proprietary Extended Aluminum, Magpul M-LOK
- Finish/Color: Grey Cerakote
- Platform: AR-15
- Warranty: Lifetime Guarantee
What’s Included
- Radian Model 1 complete upper receiver assembly
- 14.5" fluted 416R stainless barrel with pinned & welded Dead Air KeyMo flash hider
- Proprietary extended aluminum M-LOK handguard
- Radian enhanced black nitride M16 bolt carrier group
- Radian Raptor-SD ambidextrous charging handle
Frequently Asked Questions
Does this Radian 6mm ARC upper come with a bolt carrier group and charging handle?
Yes. This is a complete upper assembly that ships with Radian's enhanced black nitride M16 bolt carrier group and the suppressor-optimized Raptor-SD ambidextrous charging handle. You just need a compatible AR-15 lower and 6mm ARC magazines to have a running rifle.
Will the Radian Model 1 upper fit a standard AR-15 lower?
It's built to standard AR-15 spec, so it drops onto any mil-spec AR-15 lower receiver. Keep in mind that 6mm ARC uses its own magazines rather than standard 5.56 mags, so you'll want to pick up a few dedicated 6mm ARC or 6.5 Grendel pattern magazines.
What is 6mm ARC good for compared to 5.56?
The 6mm ARC was developed by Hornady to deliver near-.308 downrange performance from the compact AR-15 platform. It shoots flatter, bucks wind better, and hits harder at distance than 5.56 while keeping recoil mild, which makes it a strong pick for long-range target work, ringing steel past 800 yards, and medium game like deer and coyotes.
Why is the barrel 14.5 inches but listed at 16 inches overall?
The 14.5-inch barrel wears a Dead Air KeyMo flash hider that is pinned and welded in place, bringing the permanent overall length to 16 inches. That setup gives you the handling of a shorter barrel while keeping the muzzle device locked on for good.




Reviews
There are no reviews yet.