Description
The Barnes TSX in .416 caliber, 400 grain is about as serious as a hunting bullet gets. Machined from 100% copper with no lead core to come apart, it's the bullet handloaders reach for when the animal at the end of the barrel can hunt them back. On impact the nose peels open into four sharp cutting petals, and because there's no jacket to separate from a core, it holds together and drives straight through heavy bone and muscle. Barnes rates the TSX design at roughly 28 percent deeper penetration than the best lead-core bullets, and these typically retain close to all of their original weight.
What Sets the .416 400gr TSX Apart
What makes the Triple-Shock tick are the grooves cut into the shank. Those rings give the copper somewhere to go as the bullet rides down the bore, which cuts fouling, drops pressure, and often lets you push a little more velocity out of your load. The flat base helps the bullet obturate cleanly and tends to shoot tight once you find the sweet spot. Spec-wise this one measures .416 in diameter, runs 1.59 inches long, carries a sectional density around .33 and a G1 ballistic coefficient of .392.
Loading the Barnes 400gr .416 TSX
Copper bullets like a little room to breathe, so Barnes suggests starting your seating depth somewhere in the .030 to .070 inch range off the lands and working from there. It's a forgiving bullet to tune, and handloaders have had good luck across the .416 family, from the .416 Remington Magnum and .416 Ruger to the big .416 Rigby and even wildcat and Nitro Express chamberings. Expect to spend a little time at the bench finding the node your rifle likes, and you'll be rewarded with a load you can trust on dangerous game.
This is a premium dangerous-game projectile first and foremost, equally at home on Cape buffalo, big bears, or anything else that demands deep, reliable penetration and all the weight staying put.
Key Specifications
- Manufacturer: Barnes
- Manufacturer Part Number (MPN): 30532
- UPC: 716876416899
- Caliber: .416
- Bullet Diameter: 0.416 in
- Bullet Weight: 400 grain
- Bullet Type: TSX (Triple-Shock X) Flat Base
- Construction: 100% Copper, Lead Free
- Tip Style: Hollow Point
- Cannelure: Yes
- Bullet Length: 1.59 in
- Sectional Density (S.D.): 0.33
- Ballistic Coefficient (G1): 0.392
- Quantity: 50 per box
What’s Included
- 50 Barnes TSX .416 400gr Flat Base bullets
Frequently Asked Questions
What cartridges can I load the Barnes TSX .416 400gr bullet in?
This .416 diameter, 400-grain bullet works across the .416 family, including the .416 Remington Magnum, .416 Ruger, and .416 Rigby. Reloaders also run it in wildcats and Nitro Express chamberings like the 500/416 NE. As always, use published Barnes load data for your specific cartridge.
Why is the TSX made entirely of copper instead of a lead core?
The all-copper build means there's no jacket and core to separate on impact, so the bullet stays in one piece and penetrates deep through heavy bone and muscle. Barnes rates the design at around 28 percent deeper penetration than top lead-core bullets, and it typically holds onto nearly all its original weight. That's exactly what you want on dangerous game.
What seating depth does Barnes recommend for these TSX bullets?
Copper bullets perform best with a little jump to the lands. Barnes suggests starting somewhere between .030 and .070 inch off the lands, then fine-tuning from there to find the depth your rifle shoots best. It's a forgiving bullet once you dial it in.
What do the grooves cut into the shank actually do?
Those rings are a hallmark of the Triple-Shock design. They give the copper room to flow as the bullet travels down the bore, which reduces fouling, lowers pressure, and often lets you load to higher velocities. The net result is cleaner barrels and better accuracy.



Reviews
There are no reviews yet.