0
0

RCBS Hand Case Neck Turner Pilot 17 Caliber (.172) – MPN 90405

UPC: 076683904058

$13.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're running an RCBS Hand Case Neck Turner, this .17 caliber pilot is the piece that makes the whole setup work. It drops inside the case neck and guides the turning cutter as it shaves brass from the outside, which is how you get the even wall thickness that leads to better bullet release and tighter groups downrange.

The pilot is sized specifically for .17 caliber brass (.172), and that snug, precise fit matters more than folks expect. A pilot that's too loose lets the cutter wander, and that's exactly the inconsistency you're trying to eliminate when you turn necks in the first place. This one keeps everything concentric so each case comes off the tool matching the last.

Why the 17 Cal Pilot Earns a Spot on the Bench

Neck turning is one of those steps serious handloaders lean on to pull variables out of their ammo. Commercial brass rarely comes with perfectly uniform neck walls, and that uneven thickness can show up as runout and inconsistent neck tension. Pairing the Hand Case Neck Turner with the correct caliber pilot lets you true up those necks and get your brass behaving the same round to round, which is a big deal for benchrest and long-range precision work.

Matching the Pilot to Your Hand Case Neck Turner

This is a caliber-specific part and it's required to run the Hand Case Neck Turner on .17 caliber cases. The turner itself uses interchangeable pilots so you can set it up for whatever you're loading, and the cutter zeroes to the pilot before you dial in your desired thickness in fine increments. Keep in mind the pilot is sold on its own, so if you don't already own the Hand Case Neck Turner you'll want to grab that too.

For anyone chasing the last bit of consistency out of .17 caliber loads, this little pilot does a lot of heavy lifting for how simple it is.

Key Specifications

  • Manufacturer: RCBS
  • Manufacturer Part Number (MPN): 90405
  • UPC: 076683904058
  • Caliber: 17 Caliber (.172)
  • Equipment Type: Case Neck Turner Pilot
  • Compatibility: RCBS Hand Case Neck Turner
  • Fit: Caliber-specific, required for neck turning
  • Quantity: 1 pilot

What’s Included

  • (1) RCBS Hand Case Neck Turner Pilot, .17 Caliber

Frequently Asked Questions

What does the 17 cal pilot do on the Hand Case Neck Turner?

The pilot slides inside the case neck and guides the turning cutter as it peels brass from the outside of the neck. This keeps the cutter aligned so you end up with uniform neck wall thickness. That consistency is what helps improve bullet seating and accuracy.

Do I need the Hand Case Neck Turner to use this pilot?

Yes. This is a caliber-specific pilot made to work with the RCBS Hand Case Neck Turner, and it's required to turn .17 caliber necks. The pilot is sold separately, so if you don't own the turner yet you'll want to pick one up alongside this.

Will this pilot fit any .17 caliber brass?

It's sized for standard .17 caliber bullet diameter (.172), so it works across the common .17 cartridges you'd be neck turning. The snug fit inside the neck is what keeps everything concentric. Just make sure you're matching the pilot to the bullet diameter of your cartridge.

Why bother turning case necks at all?

Commercial brass often has uneven neck wall thickness, which can create runout and inconsistent neck tension. Turning the necks trues them up so each case holds the bullet the same way. Precision shooters doing benchrest and long-range work rely on this step to tighten up their groups.

Additional information

UPC

076683904058

Manufacturer

Manufacturer Part Number

90405

Caliber/Gauge

17 Caliber

Reviews

There are no reviews yet.

Be the first to review “RCBS Hand Case Neck Turner Pilot 17 Caliber (.172) – MPN 90405”