0
0

RCBS 0.204″ Steel Neck Sizing Bushing – Gold Medal Match Dies

UPC: 076683815194

$16.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

This is the .204" steel neck sizing bushing from RCBS, a small piece that carries a big load in the precision reloading game. It drops into your RCBS Gold Medal Match series bushing dies and lets you set exactly how much grip your case neck has on the bullet. If you've been chasing tighter groups and better consistency, controlling neck tension is one of the levers that makes a real difference, and that's exactly what this bushing is here to do.

What the .204" Neck Bushing Does for Your Loads

Instead of sizing the neck down and then opening it back up with an expander ball, a bushing die sizes the neck to one specific diameter in a single pass. That approach works the brass less, which helps prolong case life and keeps your neck concentric. Picking the right bushing is straightforward: measure the outside neck diameter of a loaded round and subtract about .002" to .003", which leaves roughly .001" of spring-back for proper tension. A lot of handloaders keep a few sizes on hand above and below their target so they can fine-tune as brass and components change.

Getting the Most Out of the Steel Neck Bushing

This bushing is self-centering, so it aligns itself with the case neck as it sizes for clean, even results. It ships in bare steel, or "in-the-white," which means you'll want to run your usual case lube when sizing. For the best payoff, pair it with quality brass that has consistent neck wall thickness. Uniform brass is what lets a precision bushing like this really shine, and it's the combination that bench rest and long range folks have leaned on for years.

Keep in mind this bushing is made specifically for RCBS Gold Medal Match sizing dies, and it works in both the full-length and neck-sizing styles. If precision is the goal and you're already running a bushing die setup, this is the kind of detail-level upgrade that pays off downrange.

Key Specifications

  • Manufacturer: RCBS
  • Manufacturer Part Number: 81519
  • UPC: 076683815194
  • Bushing Diameter: 0.204 in
  • Material: Steel (bare / in-the-white finish)
  • Design: Self-centering, interchangeable
  • Compatibility: RCBS Gold Medal Match series bushing dies
  • Die Styles: Works in full-length and neck-sizing bushing dies
  • Country of Origin: Made in USA

What’s Included

  • One RCBS 0.204" steel neck sizing bushing

Frequently Asked Questions

Which dies does the .204" steel neck sizing bushing fit?

This bushing is made for RCBS Gold Medal Match series bushing dies and works in both the full-length and neck-sizing styles. Redding, Wilson, and Hornady bushings of the same type are also commonly used in RCBS Gold Medal bushing dies, so the system is flexible if you already own other brands.

How do I know if .204" is the right bushing size for my loads?

Measure the outside neck diameter of a loaded cartridge and subtract about .002" to .003", which leaves roughly .001" of brass spring-back for proper neck tension. You can also measure neck wall thickness, multiply by two, add your bullet diameter, then subtract .001". Many reloaders keep bushings one or two sizes above and below their target to fine-tune as needed.

Do I need to lubricate when using this steel neck bushing?

Yes. The bushing comes in bare steel, or "in-the-white," so standard case lubrication is still part of the process. A little lube keeps sizing smooth and helps protect your brass and the bushing.

Will this bushing improve my accuracy?

A properly fitted bushing sizes the neck in one pass and works the brass less, which helps prolong case life and improve consistency. To get the full benefit, use quality brass with uniform neck wall thickness, since consistent brass is what lets precise neck tension translate into tighter groups.

Additional information

UPC

076683815194

Manufacturer

Manufacturer Part Number

81519

Reviews

There are no reviews yet.

Be the first to review “RCBS 0.204″ Steel Neck Sizing Bushing – Gold Medal Match Dies”