Description
Anyone who owns an AR-15 knows the barrel extension is the part of the rifle you dread cleaning. That's the star chamber, where the barrel and upper receiver meet, and the recesses between the locking lugs pack in carbon and fouling that a bore brush or a wrapped patch just skates right past. Over time that gunk hardens into a crust that only gets worse. These Swab-Its foam swabs were designed to get in there and pull it out.
The trick is in the shape. The compressible foam head squeezes down small enough to slide through the barrel extension, then springs back open to make full 360-degree contact once it's inside the chamber. Little foam wings tuck in behind the locking lugs and grab fouling in the exact corners where cotton and bristles come up short. Drop some solvent on the tip and it carries the cleaner right where you need it, then spreads a thin coat of lube on the way back out. The foam is lint-free and fiber-free, so you're not leaving cotton strands behind to gum up your action.
What Makes the Star Chamber Swabs Worth Keeping Around
Each bag comes with three swabs, and these aren't one-and-done throwaways. Rinse them with mineral spirits or a little degreasing soap and water and they're ready for the next round. Users report getting several cleanings out of a single swab before it shows any wear, and the white foam does stain over time from the grime it lifts, which is more of a badge of honor than a problem. A pack of three will outlast a whole bag of patches or felt pads.
Sizing and Fit for the Star Chamber Swabs
These are cut for AR-15 and M4 platforms chambered in 5.56/.223. AR-10s and bolt guns run larger chambers and locking lugs, so the foam won't fill those the same way. As a nice bonus, a swab parked in the chamber works as a visible empty-chamber indicator when the rifle is on the bench or in the safe. Made in the USA, and simple enough that you'll wonder how you cleaned around those lugs before.
Key Specifications
- Manufacturer: Swab-Its by Super Brush
- Manufacturer Part Number: 43-5556-12-2
- UPC: 603266355565
- Quantity: 3 swabs per bag
- Platform: AR-15 / M4 (5.56 NATO / .223)
- Caliber Reference: .22 Caliber
- Material: Reticulated polyurethane foam
- Chamber Coverage: 360-degree barrel extension contact
- Design: Winged foam tip for locking lug recesses
- Lint / Fiber: Lint-free and fiber-free
- Reusable: Yes, washable with mineral spirits or soap and water
- Doubles As: Empty-chamber indicator
- Country of Origin: Made in USA
What’s Included
- 3 Star Chamber Cleaning Foam Swabs
Frequently Asked Questions
What exactly do the AR-15 star chamber swabs clean?
They target the star chamber, also called the barrel extension, where the barrel meets the upper receiver. The winged foam gets into the recesses between the locking lugs, which is the spot where carbon and fouling collect and where standard brushes and patches struggle to reach. The head expands to make full 360-degree contact inside the chamber.
Can the star chamber swabs be reused, or are they one-time use?
They're fully reusable. Rinse them out with mineral spirits or a bit of degreasing soap and water after cleaning, and they're ready to go again. The foam will stain over time from the grime it pulls out, but that doesn't affect how it works, and a single swab typically lasts through many cleaning sessions.
Will these swabs fit an AR-10 or a bolt-action rifle?
No, they're sized specifically for AR-15 and M4 platforms in 5.56/.223. AR-10s and bolt guns are built with noticeably larger chambers and locking lugs, so the foam won't fill and contact those surfaces the way it needs to. Stick with these for your standard AR-15 build.
Do I still need a chamber brush if I use these swabs?
For routine maintenance, the foam swab carries solvent into the recesses and lifts fouling in one pass, so most owners can skip the brush. If you're dealing with a badly neglected rifle with heavy hardened carbon, running a brass chamber brush first can loosen things up before you finish with the swab.





Reviews
There are no reviews yet.