Description
Loading .300 Blackout for a gas gun comes with its own quirks, and this RCBS AR Series seater die is purpose-built to handle them. Instead of a roll crimp, it uses a taper crimp that squeezes the case mouth straight in. That matters when you're running cases of slightly different lengths through the same batch, which is pretty normal when you're forming Blackout brass from trimmed 5.56 or 223. The taper design is more forgiving across those length variations, and it works especially well with cannelured bullets where a roll crimp might otherwise bulge the neck or buckle the shoulder.
Why the Taper Crimp Seater Earns Its Keep
This die does two jobs in one station. It seats the bullet to your chosen depth and applies the crimp on the same stroke, which is a real time saver if you're running a progressive press and loading Blackout in volume. The internals are the same precision-drilled and reamed steel RCBS puts in all their dies, hand polished and hardened so they hold up to the abrasive wear that case brass puts on tooling over thousands of rounds. The AR Series lineup was designed around semi-auto feeding and function, so the geometry is dialed in for rounds that need to feed, chamber, and cycle reliably rather than just sit in a bolt-action chamber.
Getting the Most From Your 300 Blackout Reloads
One thing worth knowing up front: this item is the taper crimp seater die on its own, not a full two-die set, so you'll want a sizing die to go with it. If you're building subsonic loads with big coated bullets, some reloaders add a separate neck expander to open things up a touch, but for standard cannelured projectiles this die handles seating and crimping cleanly. Set it up once, lock the rings, and it'll turn out uniform rounds pull after pull. Like the rest of the RCBS line, it's made in the USA and backed by their lifetime warranty.
Key Specifications
- Manufacturer: RCBS
- Caliber: .300 AAC Blackout
- Die Type: Taper Crimp Seater Die
- Series: AR Series
- Application: AR-style and semi-automatic rifles
- Material: Hardened, hand-polished steel
- Crimp Style: Taper crimp
- Country of Origin: USA
- Warranty: Lifetime limited
- Manufacturer Part Number: 22462
- Model: 22462
- UPC: 076683224620
What’s Included
- RCBS AR Series .300 AAC Blackout Taper Crimp Seater Die (single die)
Frequently Asked Questions
Is this a full die set or just the taper crimp seater die?
This SKU is the taper crimp seater die on its own, not a two-die set. You'll still need a sizing die to complete your setup, and for AR use the small base sizer is a popular pairing since it helps guarantee the finished round rechambers. If you want everything in one box, RCBS also offers the full AR Series small base two-die set for .300 Blackout.
Why use a taper crimp instead of a roll crimp for 300 Blackout?
A taper crimp squeezes the case mouth straight inward rather than rolling it over, which is more forgiving when your cases vary slightly in length. That's common with Blackout brass formed from trimmed 5.56 or 223. With cannelured bullets, the taper crimp also helps prevent the neck bulges and buckled shoulders a roll crimp can cause.
Does this die work on a progressive press?
Yes, it's a favorite for progressive setups. Since it seats the bullet and applies the crimp in a single stroke, it saves a station and speeds up volume loading. Set your seating depth and crimp once, lock the rings, and it'll run consistently batch after batch.
Do I need a separate neck expander with this seater die?
For standard cannelured bullets, this die handles seating and crimping without any extra tooling. Some reloaders building subsonic loads with large diameter coated bullets add a separate neck expander to open the case mouth a bit, which eases seating those fatter projectiles. It's not required for typical loads, just something to keep in mind if you shoot heavy coated subsonics.





Reviews
There are no reviews yet.