Description
The 6mm XC (or 6XC) earned its stripes on the high power line. Developed by the legendary David Tubb, an 11-time NRA National High Power Champion, this cartridge became a go-to for across-the-course and 1000-yard prone shooters who wanted flat trajectory, manageable recoil, and the kind of accuracy that wins at Camp Perry. A cartridge like this rewards careful handloading, and the RCBS MatchMaster line was designed to give you that level of control.
This is a two-die set that includes a full-length bushing sizing die and a micrometer-adjustable bullet seating die. Each die is machined from case-hardened steel with internal surfaces that are precision-drilled, reamed, and hand polished, so your brass runs smooth every cycle. The dies use the standard 7/8"-14 thread and fit the vast majority of reloading presses out there.
What Sets the 6mm XC MatchMaster Sizing Die Apart
The sizing die runs an interchangeable neck bushing system, which is the heart of precision reloading. Swapping bushings lets you set neck tension exactly where your rifle and load like it, while working the brass as little as possible to extend case life. A good starting point is measuring the outside neck diameter of a loaded round and subtracting about .002" to .003". Keep in mind the neck bushings are sold separately, and it's worth owning a couple sizes above and below your target. The die also features a titanium carbo nitride coated expander that reduces brass buildup and makes case extraction noticeably smoother.
Dialing In the MatchMaster Seater Die
The seating die is where repeatability lives. A large, oversized micrometer with easy-to-read markings lets you adjust seating depth in one-thousandth-inch increments, and the numbers stay legible even with lube on your fingers. RCBS's loading window lets you drop a bullet straight into the die rather than balancing it on the case mouth, and the free-floating, self-centering seating stem aligns the bullet and case before they ever meet. The result is concentric ammo built to shrink your groups.
Key Specifications
- Manufacturer: RCBS
- Product Line: MatchMaster
- Caliber: 6mm XC (6XC)
- Projectile Diameter: .243"
- Die Type: Full-Length Bushing Sizing and Bullet Seating
- Number of Dies: 2
- Thread Size: 7/8"-14
- Expander: Titanium Carbo Nitride (TiCN) coated
- Seater Adjustment: Micrometer, .001" increments
- Material: Case-hardened steel
- Neck Bushings Included: No (sold separately)
- Country of Origin: USA
- Warranty: Limited Lifetime
- Manufacturer Part Number: 17108
- UPC: 604544653885
What’s Included
- Full-length bushing sizing die
- Micrometer-adjustable bullet seating die
- Spare decapping stem assembly with expander ball stand-in
- Instruction manual
- Reloading data sheet
- Green storage die box
Frequently Asked Questions
Are neck bushings included with the 6mm XC MatchMaster die set?
No, the neck bushings are sold separately. This is standard for bushing-style dies since the whole point is choosing the exact bushing diameter that matches your brass and desired neck tension. A good rule of thumb is to measure the outside diameter of a loaded case neck and subtract about .002" to .003", and it helps to keep a couple sizes on hand to tune your load.
What dies come in the RCBS 6mm XC MatchMaster set?
The set includes a full-length bushing sizing die and a micrometer-adjustable bullet seating die. The sizing die handles resizing, decapping, and neck tension through the interchangeable bushing, while the seater gives you precise, repeatable seating depth. RCBS also tucks in a spare decapping stem assembly along with the manual and a reloading data sheet.
Will these dies fit my press?
Yes, the MatchMaster dies use the industry-standard 7/8"-14 thread, so they'll thread right into the vast majority of single-stage and turret presses. If your press accepts common dies, you're good to go.
What makes the 6mm XC worth reloading for?
The 6mm XC, designed by champion shooter David Tubb, is one of the most accurate long-range 6mm rounds built for repeating rifles. It's a proven winner in NRA High Power and long-range competition out to 1000 yards, offering flat trajectory and light recoil. Because it thrives on carefully built ammunition, a quality die set like the MatchMaster helps you get the most out of the cartridge.



Reviews
There are no reviews yet.